Справочник Пользователя для INGICS TECHNOLOGY CO. LTD. IGS01S
INGICS
TECHNOLOGY
the gateway can bridge your BLE devices to the local TCP server of cloud server for management.
BLE
BLE is normally in listening mode. It collects the messages advertised by other BLE devices. These
messages are then transferred to WiFi and sent to the cloud server configured by the user. The packet
format sent to the cloud server as below:
$<report type>,<tag id>,<gateway id>,<rssi>,<raw packet content>,*<unix epoch timestamp>\r\n
examples:
examples:
$GPRP,CCB97E7361A4,CB412F0C8EDC,-49,1309696773206D65736820233220285445535429020106
$GPRP,E5A706E3923A,CB412F0C8EDC,-87,0201041AFF590002150112233445566778899AABBCCDDEEFF0000100C3BB
*Note:
When NTP is enabled, a timestamp field is added to the packet. Check System section for the NTP
setting.
$GPRP,E5A706E3923A,CB412F0C8EDC,-87,0201041AFF590002150112233445566778899AABBCCDDEEFF0000100C3BB
*Note:
When NTP is enabled, a timestamp field is added to the packet. Check System section for the NTP
setting.
<report type>
GPRP: general purpose report .
SRRP: active scan response report
SRRP: active scan response report
<tag id>
MAC address or ID of tag/beacon
<gateway id>
MAC address of gateway’s BLE
<rssi>
RSSI of tag/beacon
<raw packet content>
Raw packet received by the gateway
<unix epoch timestamp>
Optional timestamp when NTP is enabled
Input and Output
Multi-function button
One multi-function button is on one side of the iGS01S as the figure showed.
It is used to act WPS, reset to default settings, and OTA (over-the-air FW upgrade). Below is how it
functions.
INGICS TECHNOLOGY CO., LTD. • JK.FAN@INGICS.COM • WWW.INGICS.COM
3