Справочник Пользователя для Apply Mobile Ltd IDT00201
From a user's point view, the iDENtear token is only used as one end-point of a paired Bluetooth
connection. The other end-point of the connection is an external client application that relays all
communication from the token to the iDENtear provisioning server for identification and
authentication purposes, and vice versa.
connection. The other end-point of the connection is an external client application that relays all
communication from the token to the iDENtear provisioning server for identification and
authentication purposes, and vice versa.
The token is operated with the button. In its default state, the token is in sleep mode and does not
advertise its own Bluetooth presence or accept external connection requests.
advertise its own Bluetooth presence or accept external connection requests.
To establish a Bluetooth connection, press the button.
o
Button press switches Bluetooth Smart advertising on/off. If there is no suitable
Bluetooth device in range to form a connection with, nothing happens.
Bluetooth device in range to form a connection with, nothing happens.
o
Advertising turns off automatically after 20 seconds if no Bluetooth connection
has been established.
has been established.
To terminate an established connection, press the button.
o
Connection terminates automatically after 60 seconds if no data has been
transferred.
transferred.
The current status of the token is indicated by the LEDs below the button.
Green LED
Red LED
Description
Off
Off
Token is in sleep more, and can be activated by pressing the
button
button
Blinking 1x /s Off
Token is advertising and ready to connect
Blinking 2x /s Off
Token is connected in normal mode
Blinking 3x /s Off
Token is connected in FIPS approved Crypto Officer mode
Blinking
rapidly
rapidly
Off
Token is communicating
Off
Blinking
Internal error. Return token to helpdesk.
Blinking
Blinking
Battery low. Return token to helpdesk.
On constantly
On
constantly
constantly
Battery empty. Return token to helpdesk.
Maintenance
Clearing Bluetooth Pairings
To clear all Bluetooth pairings from the device:
Make sure the token is in sleep mode (both LEDs off)
Push the button and keep it pressed
After a moment, the red LED starts to blink rapidly. Release the button.
After the operation, all Bluetooth pairings from the token have been cleared.