Справочник Пользователя для Shenzhen Ejeas Technology Co. Ltd. FBIM
To ensure you’re your expose to RF electromagnetic energy is within the FCC allowable limits for occupational use, always
adhere to the following guidelines:
�
DO NOT
operate the radio without a proper antenna attached, as this may damaged the radio and may also
cause you to exceed FCC RF exposure limits. A proper antenna is the antenna supplied with this radio by the manufacturer or
antenna specifically authorized by the manufacturer for use with this radio.
�
DO NOT
transmits for more than 50% of total radio use time (“50%duty cycle”). Transmitting more than 50%
of the time can cause FCC RF exposure compliance requirements to be exceeded. The radio is transmitting when the “TX
indicator” lights red. You can cause the radio to transmit by pressing the “PTT” switch.
�
ALWAYS
keep the antenna at least 10 mm away from the face when transmitting and only use the
belt-clip which is listed in instructions when attaching the radio to your belt, etc., to ensure FCC RF exposure compliance
requirements are not exceeded. To provide the recipients of your transmission the best sound quality, hold the antenna at least 5
cm (2 inches) from your mouth, and slightly off to one side.
The information listed above provides the user with the information needed to make him or her aware of RF exposure, and what to
do to as‐sure that this radio operates with the FCC RF exposure limits of this radio.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.