Справочник Пользователя для SHENZHEN FCAR TECHNOLOGY CO. LTD IDIAGSF7SX
FCAR Product Manual
3
operation, avoid direct contact with the battery fluid, in particular being careful not to
splash into the eyes. Keep away from fire.
splash into the eyes. Keep away from fire.
z
The engine exhaust gas contains a variety of toxic compounds, which one should avoid
breathing in. . During the operation, park the vehicle in a well-ventilated place.
z
When the engine is running, the temperature is very high; please avoid contact with the
water tank, exhaust pipe and other high temperature components.
z
Before starting the engine, apply the handbrake and place the shift lever in Neutral (Manual
Transmission) or P range (Automatic Transmission) to avoid sudden movements of the
vehicle when starting the engine.
vehicle when starting the engine.
z
Before repairing the vehicle, apply the parking brake, engage the Neutral or P range, and
lower the driver seat’s glass doors.
z
If the engine can be started, warm-up to normal temperature (water temperature at about
80 °C), and turn off the auxiliary electrical appliances (such as air conditioning, lighting,
sound, etc.).
sound, etc.).
z
Find the diagnostic socket of this car; check and confirm the diagnostic socket lines are in
good condition, connecting the main unit for diagnosis. Otherwise, do not test, to avoid
damage to the main unit. If necessary, use a multimeter to measure the voltage of the
diagnostic socket.
damage to the main unit. If necessary, use a multimeter to measure the voltage of the
diagnostic socket.
Instrument Use Notes
z
When using FCAR series products for testing, please be gentle and keep them away from
heat and electromagnetic fields, to avoid interference to the main unit.
z
Do not use sharp tools to click the screen; the matched touch pen is recommended.
z
When electrical components are energized do not disconnect the circuit, to prevent
self-inductance and mutual inductance current damaging the sensors and automotive ECU.
z
When electrical components are working normally, magnetic objects are forbidden near the
automotive control unit, otherwise the vehicle control unit may be damaged.
z
Before disassembling the vehicle control unit or electrical components, turn off the ignition
switch for 1 minute.