Справочник Пользователя для Roseman Engineering Ltd. 2288
998 Old Eagle School Road, Suite 1215
|
Wayne, Pennsylvania 19087
|
T: 610-225-8350
|
F: 610.971.9447
|
www.assetworks.com
65
16
Completion of Installation
Verify Installation
Upon completing installation, verify that the GREEN LED on the FJ3 is blinking every
second. This indicates good power and grounding.
second. This indicates good power and grounding.
There are three indicator LEDs on the FJ3 (see
Figure 2
on page 11) one green LED,
one red LED and one orange LED:
LED COLOR
FUNCTION
INDICATION
RED
CANBUS
•
Blinks every second when no data
received.
•
Blinks according to the data transfer rate
when receiving data.
when receiving data.
GREEN
Power and RF
RF transmission - Fast blinking Power ON -
Blinks every second
Blinks every second
ORANGE
GPS/GPRS
Blinks when GPS unit is connected and data
from the GPS is transmitted
from the GPS is transmitted
Note
During normal operations, the green LED also blinks every time an
RF message is received, indicating that the FJ3 is communicating
with the WAF or VDC antenna.
RF message is received, indicating that the FJ3 is communicating
with the WAF or VDC antenna.
After power up, the green LED blinks every second. (Indicating
power and ground are connected).
The green LED also blinks every time an RF message is received.
(Indicating the FJ3 is communicating with the WAF or VDC antenna)
power and ground are connected).
The green LED also blinks every time an RF message is received.
(Indicating the FJ3 is communicating with the WAF or VDC antenna)
When FJ3 is set to Hour counter using the VSS input, the red LED is on.
(This indicates good communication with the vehicle/equipment.)
(This indicates good communication with the vehicle/equipment.)