Справочник Пользователя для Shenzhen city global development Electronic Co. LTD. N3

 
 

 

4/5 

 

Remote side of a total of three kinds of connection status: 

(1) Slow Blink (1.25Hz) - This state searches only for paired Dongle and is used to wake up the 

original Dongle. 

(2) Flash (2.5Hz) - This state can accept any Dongle for un-paired Dongle. 

(3) Extremely Fast Flash (5Hz) - This status accepts any Dongle, but excludes the original Dongle 

pair, which is used to switch Dongle. 

Remote Connection Status: 

(1)  The first time the power, Remote to flash, search for any Dongle, for 30 seconds, if not found 

any Dongle is to sleep. 

(2)   Sleep wake-up, 

2-1 If there is a pair device, Remote is slow flashing, search for the original matching       

                    Dongle, for 10 seconds, if not found, The original pair of Dongle, converted to flash state, 

                    search any Dongle, for 20 seconds, if not found any Dongle It goes to sleep.   

2-2 If there is no matching device, Remote is flash, search for any Dongle, for 30 seconds,     

                    if not search to any Ho Dongle went into sleep.   

2-3 after entering Sleep To wake-up the handle, press the 

START

 

button 

(3) When pressing the key combination (L3 + Select), Remote is flashing rapidly. Exclude the 

original Dongle and search for any other Dongle for 10 seconds. If no other Dongle is found, it 

will change to flash , search for any Dongle 

(Note 1)

 

for 20 seconds, if not find any Dongle 

goes to sleep. 

 

      

Note 1: Search for any Dongle at this time, may be connected with the original excluded Dongle.