Справочник Пользователя для 4G Technologies LLC GC527444
Warning
FCC regulations state that:
1. The Grantee of a license has the responsibility of assuring that all equipment operated under that license
FCC regulations state that:
1. The Grantee of a license has the responsibility of assuring that all equipment operated under that license
confirms to the specifications of the license.
2. The RF power output of a radio transmitter shall be no more than that required for satisfactory technical
operation considering the area to be covered and local conditions.
3. The frequency, deviation, and power of a radio transmitter must be maintained within specified limits. It is
recommended, therefore, that these three parameters be checked before the station is placed in service.
REMEMBER
The efficiency of the equipment depends upon a good installation. Manufacturer recommends that adjustments
to this equipment be made ONLY by a certified technician.
CAUTION
Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
The equipment accessories are approved by FCC and only accessories from Manufacturer are qualified for this
equipment applications. Detail information see FCC part 15.27.
IMPORTANT
(a) Only shielded cables, antennas, and special connectors from Manufacturer can be used in this system.
Information detailing any alternative method used to supply the special accessories shall be must be approved
by FCC and included in the application for a grant of equipment authorization or retained in the verification
records, as appropriate. The party responsible for the equipment shall ensure that these special accessories are
provided with the equipment. The instruction manual for such devices shall include appropriate instructions
on the first page of the text concerned with the installation of the device that these special accessories must be
used with the device. It is the responsibility of the user to use the needed special accessories supplied with the
equipment.
(b) If a device requiring special accessories is installed by or under the supervision of the party marketing the
device, it is the responsibility of that party to install the equipment using the special accessories. For
equipment requiring professional installation, it is not necessary for the responsible party to market the special
accessories with the equipment. However, the need to use the special accessories must be detailed in the
instruction manual, and it is the responsibility of the installer to provide and to install the required accessories.
(c) Accessory items that can be readily obtained from multiple retail outlets are not considered to be special
accessories and are not required to be marketed with the equipment. The manual included with the equipment
must specify what additional components or accessories are required to be used in order to ensure compliance
with this part, and it is the responsibility of the user to provide and use those components and accessories.
(d) The resulting system, including any accessories or components marketed with the equipment, must comply
with the regulations.
IMPORTANT INFORMATION
The efficiency of the equipment depends upon a good installation. Manufacturer recommends that adjustments
to this equipment be made ONLY by a certified technician.
CAUTION
Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
The equipment accessories are approved by FCC and only accessories from Manufacturer are qualified for this
equipment applications. Detail information see FCC part 15.27.
IMPORTANT
(a) Only shielded cables, antennas, and special connectors from Manufacturer can be used in this system.
Information detailing any alternative method used to supply the special accessories shall be must be approved
by FCC and included in the application for a grant of equipment authorization or retained in the verification
records, as appropriate. The party responsible for the equipment shall ensure that these special accessories are
provided with the equipment. The instruction manual for such devices shall include appropriate instructions
on the first page of the text concerned with the installation of the device that these special accessories must be
used with the device. It is the responsibility of the user to use the needed special accessories supplied with the
equipment.
(b) If a device requiring special accessories is installed by or under the supervision of the party marketing the
device, it is the responsibility of that party to install the equipment using the special accessories. For
equipment requiring professional installation, it is not necessary for the responsible party to market the special
accessories with the equipment. However, the need to use the special accessories must be detailed in the
instruction manual, and it is the responsibility of the installer to provide and to install the required accessories.
(c) Accessory items that can be readily obtained from multiple retail outlets are not considered to be special
accessories and are not required to be marketed with the equipment. The manual included with the equipment
must specify what additional components or accessories are required to be used in order to ensure compliance
with this part, and it is the responsibility of the user to provide and use those components and accessories.
(d) The resulting system, including any accessories or components marketed with the equipment, must comply
with the regulations.
IMPORTANT INFORMATION
(FCC Part 15.105)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference received, including interference that may cause undesired operation
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference received, including interference that may cause undesired operation
of the device.
Note: The manufacturer is not responsible for any radio of TV interference caused by unauthorized
modification to this equipment. Such modification could void the user’s authority to operate the
equipment.
modification to this equipment. Such modification could void the user’s authority to operate the
equipment.