Справочник Пользователя для Zebra USB2.0 - miniUSB2.0 P1031365-055
Модели
P1031365-055
44
QLn Series User Guide
QLn Series Cleaning
Area
Method
Interval
Printhead (Figure 24)
Use the supplied cleaning pen or 70%
Isopropyl alcohol on a cotton swab to
clean the print elements from end to
end (the print elements are located in
the thin gray line on the printhead).
Isopropyl alcohol on a cotton swab to
clean the print elements from end to
end (the print elements are located in
the thin gray line on the printhead).
After every five rolls of
media (or more often, if
needed),
Linerless media requires
more frequent cleaning
media (or more often, if
needed),
Linerless media requires
more frequent cleaning
Platen Roller (Figure 24)
Rotate the platen roller and clean it
thoroughly with the cleaning pen or
70% Isopropyl alcohol and a cotton
swab.
thoroughly with the cleaning pen or
70% Isopropyl alcohol and a cotton
swab.
Platen Roller (Figure 25)
Units with linerless platens: Rotate
platen & clean bearing points only.
Avoid use of alcohol on the surface
of linerless platens
platen & clean bearing points only.
Avoid use of alcohol on the surface
of linerless platens
Peel bar (Figure 24)
Clean thoroughly with the cleaning pen
or 70% Isopropyl alcohol and a cotton
swab.
or 70% Isopropyl alcohol and a cotton
swab.
As needed
Tear bar (Figure 24)
As needed
As needed
Exterior
Water-dampened cloth or 70%
Isopropyl alcohol wipe.
Isopropyl alcohol wipe.
Interior (Figure 24)
Brush/air blow. Ensure the Bar
Sensor, Gap Sensor and Label
Present Sensor windows are free
of dust.
Sensor, Gap Sensor and Label
Present Sensor windows are free
of dust.
Units with linerless platens: Clean inside
surfaces of edge guides & media rollers
with the supplied cleaning pen or 70%
Isopropyl alcohol on a cotton swab.
surfaces of edge guides & media rollers
with the supplied cleaning pen or 70%
Isopropyl alcohol on a cotton swab.
After every five rolls of
media (or more often, if
needed)
media (or more often, if
needed)
Interior (Figure 25)