Листовка для Transition Networks CSDTF1029-123

Transition Networks, Inc.
Worldwide Headquarters:
10900 Red Circle Drive
Minnetonka, MN 55343 USA

tel: 952.941.7600 / 800.526.9267
fax: 952.941.2322
info@transition.com
http://www.transition.com

©2010 Transition Networks, Inc.
All trade marks are the property of their respective owners.
Technical information is subject to change without notice.

Specifications

Standards

ITU-T, ANSI, AT&T, ETSI

Switches

SW1: 1, 2, 3: Line Build out for short haul/DB
in Long Haul (see table)
Short Haul mode:
SW1: Pos 4 not used
SW2 - 1: Transmit all ones into copper on loss of fiber link
(UP = Disabled)
SW2 - 2: Transmit all ones (AIS) into fiber on loss of
copper link (UP = Disabled)
SW2 - 3: Long Haul/Short Haul
(Up = Short Haul)
SW2 - 4: T1/E1 selection (UP = T1)

3-position Jumper

Hardware: NID mode is determined by
4-position switch settings
Software: NID mode is determined by most recently
saved on-board microprocessor settings

Status LEDs

PWR (Power): Steady green LED indicates
connection to external AC power
SDC (Signal Detect/Copper): On indicates
twisted pair link is up
SDF (Signal Detect/Fiber): On indicates fiber link is up

Dimensions

Width: 0.86" [22 mm]
Depth: 5.0v [127 mm]
Height: 3.4" [86 mm]

Power Consumption

6.0 Watts

Environment

See chassis specifications

Shipping Weight

1 lb. [0.45 kg]

Regulatory Compliance

CISPR/EN55022 Class A; FCC Class A; CE Mark

Warranty

Lifetime

T1/E1 NID (Network Interface Device) with Remote Management

point system™ slide-in-module network interface device

T1/E1 Copper to Fiber

Ordering Info

CSDTF1011-120

Twisted Pair (RJ-48)

[1.5 km/0.9 mi.]

to 850 nm multimode (ST)

[2 km/1.2 mi.] Link Budget: 13.5 dB

CSDTF1013-120

Twisted Pair (RJ-48)

[1.5 km/0.9 mi.]

to 850 nm multimode (SC)

[2 km/1.2 mi.] Link Budget: 13.5 dB

CSDTF1027-120

Twisted Pair (RJ-48)

[1.5 km/0.9 mi.]

to 1300 nm multimode (ST)

[5 km/ 3.1 mi.] Link Budget: 13.5 dB

CSDTF1012-120

Twisted Pair (RJ-48)

[1.5 km/0.9 mi.]

1310 nm single mode (ST)

[8 km/ 5 mi.] Link Budget: 7.0 dB

CSDTF1022-120

Twisted Pair (RJ-48)

[1.5 km/0.9 mi.]

to 1310 nm single mode (ST)

[15 km/ 9.3 mi.] Link Budget: 10.0 dB

CSDTF1014-120

Twisted Pair (RJ-48)

[1.5 km/0.9 mi.]

to 1310 nm single mode (SC)

[20 km/12.4 mi.] Link Budget: 16.0 dB

CSDTF1015-120

Twisted Pair (RJ-48)

[1.5k m/0.9 mi.]

to 1310 nm single mode (SC)

[40k m/24.9 mi.] Link Budget: 30.0 dB

CSDTF1016-120

Twisted Pair (RJ-48)

[1.5 km/0.9 mi.]

to 1310 nm single mode (SC)

[60 km/37.3 mi.] Link Budget: 33.0 dB

CSDTF1017-120

Twisted Pair (RJ-48)

[1.5 km/0.9 mi.]

to 1550 nm single mode (SC)

[80 km/49.7 mi.] Link Budget: 29.0 dB

Single Fiber Products
Recommended use in pairs

CSDTF1029-120

Twisted Pair (RJ-48)

[1.5 km/0.9 mi.]

to 1310 nm TX / 1550 nm RX single fiber SM (SC)

[20 km/12.4 mi.] Link Budget: 19.0 dB

CSDTF1029-121

Twisted Pair (RJ-48)

[1.5 km/0.9 mi.]

to 1550 nm TX / 1310 nm RX single fiber SM (SC)

[20 km/12.4 mi.] Link Budget: 19.0 dB

CSDTF1029-122

Twisted Pair (RJ-48)

[1.5 km/0.9 mi.]

to 1310 nm TX / 1550 nm RX single fiber SM (SC)

[40 km/24.9 mi.] Link Budget: 25.0 dB

CSDTF1029-123

Twisted Pair (RJ-48)

[1.5 km/0.9 mi.]

to 1550 nm TX / 1310 nm RX single fiber SM (SC)

[40 km/24.9 mi.] Link Budget: 25.0 dB

Devices must be used in pairs. Typical installation will include a chassis card
installed in the Point System™ locally and a stand-alone device (SSDTF)
installed at the remote location.