Листовка для Transition Networks CGFEB1017-120
Transition Networks, Inc.
Worldwide Headquarters:
10900 Red Circle Drive
Minnetonka, MN 55343 USA
Worldwide Headquarters:
10900 Red Circle Drive
Minnetonka, MN 55343 USA
tel: 952.941.7600 / 800.526.9267
fax: 952.941.2322
info@transition.com
http://www.transition.com
fax: 952.941.2322
info@transition.com
http://www.transition.com
©2010 Transition Networks, Inc.
All trade marks are the property of their respective owners.
Technical information is subject to change without notice.
All trade marks are the property of their respective owners.
Technical information is subject to change without notice.
AUTO NEG
AUTO CROSS LINK PASS THRU LINK RESTORE
AUTO
PAUSE
UPGRADE
REMOTE FIRMWARE
CHANGE
S
OURCE
A
DDRESS
Extend Network Distance
Specifications
Standards
IEEE 802.3, IEEE 802.3ab, IEEE 802.3u,
IEEE 802.3z, IEEE 802.1P, IEEE 802.1q
IEEE 802.3z, IEEE 802.1P, IEEE 802.1q
Data Rate
Copper: 10/100/1000Mbps
Fiber: 1000Mbps
Fiber: 1000Mbps
Filtering Addresses
8K MAC Addresses
Max Frame Size
802.3ac tagged: 1628 bytes
Untagged: 1632 bytes
Untagged: 1632 bytes
Status LEDs
PWR: ON green = Power applied to card
TP (Duplex/Link/Activity):
Orange: ON = Half-duplex Link; BLINK = Activity;
Green: ON = Full-duplex Link; BLINK = Activity
TP (10Mbps/100Mbps/1000Mbps):
Off = 10Mbs; Orange = 100Mbs; Green = 1000Mbs
LACT (Fiber Link/Activity):
Green: ON = Link; BLINK = Activity
TP (Duplex/Link/Activity):
Orange: ON = Half-duplex Link; BLINK = Activity;
Green: ON = Full-duplex Link; BLINK = Activity
TP (10Mbps/100Mbps/1000Mbps):
Off = 10Mbs; Orange = 100Mbs; Green = 1000Mbs
LACT (Fiber Link/Activity):
Green: ON = Link; BLINK = Activity
Dip Switches
Switch 1: TX - Enable/Disable Auto-Negotiation
Switch 2: TX - Force 10Mbps or 100Mbps with
Switch 1 off
Switch 3: TX - Force Half or Full duplex with
Switch 1 off
Switch 4: Enable/Disable LPT
Switch 5: not used
Switch 6: not used
Switch 2: TX - Force 10Mbps or 100Mbps with
Switch 1 off
Switch 3: TX - Force Half or Full duplex with
Switch 1 off
Switch 4: Enable/Disable LPT
Switch 5: not used
Switch 6: not used
Dimensions
Width: 0.86" [22 mm]
Depth: 5.0" [127 mm]
Height: 3.4" [86 mm]
Depth: 5.0" [127 mm]
Height: 3.4" [86 mm]
Power Consumption
4.8 Watts
Environment
See chassis specifications
Shipping Weight
1 lb. [0.45 kg]
Regulatory Compliance
CISPR/EN55022 Class A, EN55024, EN61000, FCC
Class A, CE Mark
Class A, CE Mark
Warranty
Lifetime
Ordering Info
CGFEB1013-120
10/100/1000BASE-T (RJ-45)
[100 m]
to 1000BASE-SX 850 nm multimode (SC)
[62.5/125 µm: 220 m/722 ft.]
[50/125 µm: 550 m/1804 ft.]
Link Budget: 7.0 dB
Link Budget: 7.0 dB
CGFEB1024-120
10/100/1000BASE-T (RJ-45)
[100 m]
to 1000BASE-SX 1300 nm Extended MM
(62.5/125 µm fiber only) (SC)
[up to 2 km] Link Budget: 7.0 dB
CGFEB1014-120
10/100/1000BASE-T (RJ-45)
[100 m]
to 1000BASE-LX 1310 nm SM (SC)
[10 km/6.2 mi.] Link Budget: 7.0 dB
CGFEB1015-120
10/100/1000BASE-T (RJ-45)
[100 m]
to 1000BASE-LX 1310 nm SM (SC)
[25 km/15.5 mi.] Link Budget: 15.0 dB
CGFEB1017-120
10/100/1000BASE-T (RJ-45)
[100 m]
to 1000BASE-LX 1550 nm SM (SC)
[65 km/40.4 mi.] Link Budget: 20.0 dB
CGFEB1035-120
10/100/1000BASE-T (RJ-45)
[100 m]
to 1000BASE-LX 1550 nm SM (SC)
[125 km/77.7 mi.] Link Budget: 27.0 dB
CGFEB1040-120
10/100/1000BASE-T (RJ-45)
[100 m]
to 1000BASE-X SFP Slot (empty)
Single Fiber Products
Recommended use in pairs
Recommended use in pairs
CGFEB1029-120
10/100/1000BASE-T (RJ-45)
[100 m]
to 1000BASE-LX 1310 nm TX / 1550 nm RX
single fiber single mode (SC)
[20 km/12.4 mi.] Link Budget: 13.0 dB
CGFEB1029-121
10/100/ 1000BASE-T (RJ-45)
[100 m]
to 1000BASE-LX 1550 nm TX / 1310 nm RX
single fiber single mode (SC)
[20 km/12.4 mi.] Link Budget: 13.0 dB
CGFEB1029-122
10/100/ 1000BASE-T (RJ-45)
[100 m]
to 1000BASE-LX 1310 nm TX / 1550 nm RX
single fiber single mode (SC)
[40 km/24.9 mi.] Link Budget: 20.0 dB
CGFEB1029-123
10/100/ 1000BASE-T (RJ-45)
[100 m]
to 1000BASE-LX 1550 nm TX / 1310 nm RX
single fiber single mode (SC)
[40 km/24.9 mi.] Link Budget: 20.0 dB
CGFEB1029-126
10/100/ 1000BASE-T (RJ-45)
[100 m]
to 1000BASE-LX TX / RX single fiber single
mode (SC)
[80 km/49.7 mi.]
CGFEB1029-127
10/100/ 1000BASE-T (RJ-45)
[100 m]
to 1000BASE-LX TX / RX single fiber single
mode (SC)
[80 km/49.7 mi.]
Optional Accessories
(sold separately)
(sold separately)
SFP Modules
CGFEB10xx-12x
point system™ slide-in-module media converter
10/100/1000 Ethernet
10/100/1000BASE-T to 1000BASE-X
see also:
10/100/1000 Bridging Stand-Alone Media Converters
10/100/1000 Ethernet Media Converter
Features
Auto-Negotiation (copper and fiber ports)
Switch Selectable Speeds
(UTP) when Auto-Negotiation is off
AutoCross™
Link Pass Through
Remote Fault Detect
Pause
Automatic Link Restoration
IEEE 802.1P QoS, IPv4 Tos/Diffserv, IPv6 traffic class
IEEE 802.1q VLAN tagging and double tagging
(Q in Q)
Remote Firmware Upgrade
Virtual Cable Test (VCT) on UTP port
Uni-directional data transmission
allows secure traffic forwarding in only one
direction via port based VLAN
direction via port based VLAN
Bandwidth Allocation
DMI, Digital diagnostics per SFF-8472
RMON Counters for each port
Extend Network Distance
Bridge legacy 10/100 devices
to a Gigabit backbone
Secure Uni-directional
transmission via
port-based VLAN
port-based VLAN