Листовка для Transition Networks E-TBT-FRL-05 E-TBT-FRL-05-NA
Модели
E-TBT-FRL-05-NA
Stand-Alone
Ordering Information
E-TBT-FRL-05
10BASE-T (RJ-45)
[100 m/328 ft.]
10BASE-FL 850nm multimode (ST)
[2 km/1.2 mi.] Link Budget: 13.5 dB
E-TBT-FRL-05(SC)
10BASE-T (RJ-45)
[100 m/328 ft.]
10BASE-FL 850nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 13.5 dB
E-TBT-FRL-05(L)
10BASE-T (RJ-45)
[100 m/328 ft.]
10BASE-FL 1300nm MM (ST)
[5 km/3.1 mi.] Link Budget: 13.5 dB
E-TBT-FRL-05(SM)
10BASE-T (RJ-45)
[100 m/328 ft.]
10BASE-FL 1310nm SM (ST)
[20 km/12.4 mi.] Link Budget: 7.0 dB
E-TBT-FRL-05(XC)
10BASE-T (RJ-45)
[100 m/328 ft.]
10BASE-FL 1310nm single mode (SC)
[20 km/12.4 mi.] Link Budget: 7.0 dB
E-TBT-FRL-05(LH)
10BASE-T (RJ-45)
[100 m/328 ft.]
10BASE-FL 1310nm single mode (ST)
[40 km/24.9 mi.] Link Budget: 19.0 dB
Optional Accessories (sold separately)
Wide Input (24 - 60 VDC) Power Supplies
SPS-2460-SA
Stand-Alone Power Supply
Mounting Options
E-MCR-05
12-Slot Media Converter Rack
RMS19-SA4-01
4-Slot Media Converter Shelf
WMBD
DIN Rail Bracket 5.0” [127 mm]
WMBD-FS
DIN Rail Bracket (flat, small) 3.1” [79 mm]
WMBS
Wall Mount Bracket 3.2” [81 mm]
WMBV
Vertical Wall Mount Bracket 5.0” [127 mm]
Specifications
Standards
IEEE Std. 802.3 10BASE-T, 10BASE-FL
Switch
S1: Enables/disables Link Pass Through
Status LEDs
PWR (Power): ON = connection to external
AC power
Link: ON = unit is receiving link pulses from
a compliant device
RX (Receive): ON = packets are
being
received
Dimensions
Width: 3.0” [76 mm]
Depth: 3.9” [99 mm]
Height: 1.0” [25 mm]
Power
External AC/DC required; 12 VDC, 0.5A,
unregulated,
standard
Environment
0 – 50°C; 5% – 95% humidity non-condensing;
0 – 10,000 ft. altitude
Shipping Weight
2 lbs. [0.90 kg]
Safety Compliance
Wall Mount Power Supply:
UL Listed, C-UL Listed (Canada)
Regulatory Compliance
FCC Class A, CISPR22/EN55022
Class A, EN55024, EN61000,
CE
Mark
Warranty
Lifetime
E-TBT-FRL-05(xx)
E-TBT-FRL-05(xx)
stand-alone media converter
4
Integrate mixed cabling
environments using either
switched or shared Ethernet
switched or shared Ethernet
10BASE-T
Repeater
Up to
100 m UTP
10BASE-T to 10BASE-FL
Media Converter
Up to 5 km multimode fiber
or 40 km single mode fiber
Up to
10BASE-T to 10BASE-FL
Media Converter
100 m UTP
Extend Network Distance
(2) 10BASE-T to 10BASE-FL Media Converters used
back-to-back extend the distance between (2) 10BASE-
T devices up to 5 km (3.1 mi.) using multimode fiber or
up to 40 km (24.9 mi.) using single mode fiber without
a repeater.
back-to-back extend the distance between (2) 10BASE-
T devices up to 5 km (3.1 mi.) using multimode fiber or
up to 40 km (24.9 mi.) using single mode fiber without
a repeater.
Connect Unlike Devices
Connect your workgroup to a distant server or a central
switch; or extend distances between like and unlike
devices in either full or half-duplex modes.
switch; or extend distances between like and unlike
devices in either full or half-duplex modes.
Ethernet 10BASE-T to 10BASE-FL
Ethernet
see also: Ethernet 10BASE Point System™ Slide-In-Modules
Ethernet Copper to Fiber Media Converter
Features
4
AutoCross™ [
4
Link Pass Through
4
Automatic Link Restoration
Ethernet 10BASE-T to 10BASE-FL