Справочник Пользователя для Foxconn G41MD

18

18

1. Set the jumper to pins 1-2 (+5V) to wake up the computer from S1 sleep mode using the 

connected USB devices.

2. Set the jumper to pins 2-3 (+5VSB) to wake up the computer from S3 and S4 sleep modes 

using the connected USB devices. At the same time, a corresponding setting must be set in 
BIOS as below:

Set “CMOS Setup” -> “Power Management Setup” -> “USB Wake Up From S3”  to “Enabled”.

USBPWR1/2

   +5V
(Default)

1
2
3

+5VSB

1
2
3

■ 

USBPWR1 is for the internal USB connectors, USBPWR2 is for the rear USB ports.

■ 

The USB device wake-up feature requires a power supply that can provide 500mA  

on +5VSB lead for each USB port; otherwise, the system will not power up.

■ 

The total current consumed must not exceed the power supply capability (+5VSB)      

whether under normal condition or in sleep mode.

CA

UT

IO

N

      When you use the CPU FSB is 533MHz, set the jumper to pins 1-2. Return the setting to its

      original with pins 2-3 closed.

CPU_533

   Enabled

1
2
3

Disabled
(Default)

1
2
3