Листовка для Transition Networks SSDTF1015-120 SSDTF1015-120-NA

Модели

SSDTF1015-120-NA

Transition Networks, Inc.
Worldwide Headquarters:
10900 Red Circle Drive
Minnetonka, MN 55343 USA

tel: 952.941.7600 / 800.526.9267
fax: 952.941.2322
info@transition.com
http://www.transition.com

©2010 Transition Networks, Inc.
All trade marks are the property of their respective owners.
Technical information is subject to change without notice.

stand-alone media converter

Specifications

Standards

ITU-T, ANSI, AT&T, ETSI

Switches

SW1: 1, 2, 3: Line Build out for short haul/DB in
Long Haul (see table)
Short Haul mode:
SW1: Pos 4 not used
SW2 - 1: Transmit all ones into copper on loss
of fiber link (UP = Disabled)
SW2 - 2: Transmit all ones (AIS) into fiber on
loss of copper link (UP = Disabled)
SW2 - 3: Long Haul/Short Haul
(UP = Short Haul)
SW2 - 4: T1/E1 selection (Up = T1)

3-position Jumper

Hardware: mode is determined by 4-position
switch settings
Software: mode is determined by most re-
cently saved on-board microprocessor settings.

Status LEDs

PWR (Power): Steady green LED indicates
connection to external AC power
SDC (Signal Detect/Copper): On indicates
twisted pair link is up
SDF (Signal Detect/Fiber): On indicates fiber
link is up

Dimensions

Width: 3.25" [82 mm]
Depth: 4.8" [122 mm]
Height: 1.0" [25 mm]

Power

External AC/DC provided; 12V DC; 0.5A; unreg-
ulated; standard;
UL listed

Environment

0 – 50°C, 5% – 95% humidity (non-condens-
ing), 0 – 10,000 ft.

Shipping Weight

2 lbs. [0.90 kg]

Safety Compliance

Wall Mount Power Supply:
CSA certified

Regulatory Compliance

CISPR/EN55022 Class A;
FCC Class A; CE Mark

Warranty

Lifetime

see also:

T1/E1 Point System™ Slide-In-Module NID

T1/E1 Copper to Fiber

with Remote In-Band Management

Ordering Info

SSDTF1011-120

Twisted Pair (RJ-48)

[1.5 km/0.9 mi.]

to 850 nm multimode (ST)

[2 k m/1.2 mi.] Link Budget: 13.5 dB

SSDTF1013-120

Twisted Pair (RJ-48)

[1.5 km/0.9 mi.]

to 850 nm multimode (SC)

[2 km/1.2 mi.] Link Budget: 13.5 dB

SSDTF1027-120

Twisted Pair (RJ-48)

[1.5 km/0.9 mi.]

to 1300 nm multimode (ST)

[5 km/ 3.1 mi.] Link Budget: 13.5 dB

SSDTF1012-120

Twisted Pair (RJ-48)

[1.5 km/0.9 mi.]

1310 nm single mode (ST)

[8 km/ 5 mi.] Link Budget: 7.0 dB

SSDTF1022-120

Twisted Pair (RJ-48)

[1.5 km/0.9 mi.]

to 1310 nm single mode (ST)

[15 km/ 9.3 mi.] Link Budget: 10.0 dB

SSDTF1014-120

Twisted Pair (RJ-48)

[1.5 km/0.9 mi.]

to 1310 nm single mode (SC)

[20 k m/12.4 mi.] Link Budget: 16.0 dB

SSDTF1015-120

Twisted Pair (RJ-48)

[1.5 km/0.9 mi.]

to 1310 nm single mode (SC)

[40 km/24.9 mi.] Link Budget: 30.0 dB

SSDTF1016-120

Twisted Pair (RJ-48)

[1.5 km/0.9 mi.]

to 1310 nm single mode (SC)

[60 km/37.3 mi.] Link Budget: 33.0 dB

SSDTF1017-120

Twisted Pair (RJ-48)

[1.5 km/0.9 mi.]

to 1550 nm single mode (SC)

[80 km/49.7 mi.] Link Budget: 29.0 dB

Single Fiber Products
Recommended use in pairs

SSDTF1029-120

Twisted Pair (RJ-48)

[1.5 km/0.9 mi.]

to 1310 nm TX / 1550 nm RX single fiber SM (SC)

[20 km/12.4 mi.] Link Budget: 19.0 dB

SSDTF1029-121

Twisted Pair (RJ-48)

[1.5 km/0.9 mi.]

to 1550 nm TX / 1310 nm RX single fiber SM (SC)

[20 km/12.4 mi.] Link Budget: 19.0 dB

SSDTF1029-122

Twisted Pair (RJ-48)

[1.5 km/0.9 mi.]

to 1310 nm TX / 1550 nm RX single fiber SM (SC)

[40 km/24.9 mi.] Link Budget: 25.0 dB

SSDTF1029-123

Twisted Pair (RJ-48)

[1.5k m/0.9 mi.]

to 1550 nm TX / 1310 nm RX single fiber SM (SC)

[40k m/24.9 mi.] Link Budget: 25.0 dB

Devices must be used in pairs. Typically installation will include a chassis
card (CSDTF, see pages 61-62) installed in the Point System™ locally and a
stand-alone device installed at the remote location.

Optional Accessories
(sold separately)

Wide Input (18 – 72VDC) Power Supplies:

SPS-1872-PS

Piggy Back Power Supply

SPS-1872-SA

Stand-Alone Power Supply

Mounting Options:

E-MCR-05

12-slot Media Converter Rack

RMS19-SA4-01

4-slot Media Converter Shelf

WMBD

DIN Rail Bracket 5.0" [127 mm]

WMBD-F

DIN Rail Bracket (flat) 3.3" [84 mm]

WMBL

Wall Mount Bracket 4.0" [102 mm]

WMBV

Vertical Wall Mount Bracket 5.0" [127 mm]