Листовка для Transition Networks C3110-1014
Transition Networks, Inc.
Worldwide Headquarters:
10900 Red Circle Drive
Minnetonka, MN 55343 USA
Worldwide Headquarters:
10900 Red Circle Drive
Minnetonka, MN 55343 USA
tel: 952.941.7600 / 800.526.9267
fax: 952.941.2322
info@transition.com
http://www.transition.com
fax: 952.941.2322
info@transition.com
http://www.transition.com
©2011 Transition Networks, Inc.
All trade marks are the property of their respective owners.
Technical information is subject to change without notice.
All trade marks are the property of their respective owners.
Technical information is subject to change without notice.
Ordering Information
C3110-1013
1000BASE-T (RJ-45)
[100 m/328 ft.]
to 1000BASE-SX 850nm MM (SC)
[220m/721 ft. and 550 m/1804 ft.]
Link Budget: 8.5 dB
Link Budget: 8.5 dB
C3110-1024
1000BASE-T (RJ-45)
[100 m/328 ft.]
to 1000BASE-SX 1310nm extended MM (SC)
[2 km/1.2 mi.] Link Budget: 7.0 dB
C3110-1014
1000BASE-T (RJ-45)
[100 m/328 ft.]
to 1000BASE-LX 1310nm SM (SC)
[10 km/6.2 mi.] Link Budget: 10.5 dB
C3110-1015
1000BASE-T (RJ-45)
[100 m/328 ft.]
to 1000BASE-LX 1310nm SM (SC)
[25 km/15.5 mi.] Link Budget: 15.0 dB
C3110-1017
1000BASE-T (RJ-45)
[100 m/328 ft.]
to 1000BASE-LX 1550nm SM (SC)
[65 km/40.4 mi.] Link Budget: 21.0 dB
C3110-1035
1000BASE-T (RJ-45)
[100 m/328 ft.]
to 1000BASE-LX 1550nm SM (SC)
[125 km/77.5 mi.] Link Budget: 27.0 dB
C3110-1040
1000BASE-T (RJ-45)
[100 m/328 ft.]
to 1000Base-X SFP Slot (empty)
Single Fiber Products
Recommended use in pairs [pg 19]
C3110-1029-A1
1000BASE-T (RJ-45)
[100 m/328 ft.]
to 1000BASE-LX 1310nm TX/1550nm RX
single fiber single mode (SC)
[20 km/12.4 mi.] Link Budget: 13.0 dB
C3110-1029-A2
1000BASE-T (RJ-45)
[100 m/328 ft.]
to 1000BASE-LX 1550nm TX/1310nm RX
single fiber single mode (SC)
[20 km/12.4 mi.] Link Budget: 13.0 dB
C3110-1029-B1
1000BASE-T (RJ-45)
[100 m/328 ft.]
to 1000BASE-LX 1310nm TX/1550nm RX
single fiber single mode (SC)
[40 km/24.9 mi.] Link Budget: 20.0 dB
C3110-1029-B2
1000BASE-T (RJ-45)
[100 m/328 ft.]
to 1000BASE-LX 1550nm TX/1310nm RX
single fiber single mode (SC)
[40 km/24.9 mi.] Link Budget: 20.0 dB
Specifications
Standards
IEEE Std. 802.3ab, IEEE 802.3z, IEEE 802.3 2000
Data Rate
1000 Mbps, Layer-1
Switches
SW1: Remote Fiber Fault Detect
SW2: Pause (symmetric)
SW3: Pause (asymmetric)
SW4: Transparent Link Pass Through (Up=Enabled)
SW5: Fiber Auto-Negotiation (Down=Enabled)
SW6: Loopback
SW2: Pause (symmetric)
SW3: Pause (asymmetric)
SW4: Transparent Link Pass Through (Up=Enabled)
SW5: Fiber Auto-Negotiation (Down=Enabled)
SW6: Loopback
Hardware/Software
Hardware: Mode of operation is determined
Jumpers
by the settings on the 4-position switch
Software: Mode of operation is determined by the most
recently saved on-board microprocessor settings
Software: Mode of operation is determined by the most
recently saved on-board microprocessor settings
Status LEDs
LKF (fiber link): On = Fiber Link, blinking activity
PWR (Power): On = Connection to powered backplane
TP LED 1 (Copper Link): On = Link, bliking activity
TP LED2 (Copper Duplex): On = Full Duplex
PWR (Power): On = Connection to powered backplane
TP LED 1 (Copper Link): On = Link, bliking activity
TP LED2 (Copper Duplex): On = Full Duplex
Dimensions
Width: 0.86” [22 mm]
Depth: 6.5” [165 mm]
Height: 3.4” [86 mm]
Depth: 6.5” [165 mm]
Height: 3.4” [86 mm]
Power Consumption
3.6 Watts, 300mA @ 112 VDC
Environment
See chassis specifications
Shipping Weight
1 lb [.45 kg]
Regulatory Compliance
CISPR/EN55022 Class A, FCC Class A, CE Mark, EN55024
Warranty
Lifetime
C3110 Series
slide-in-module for the ion platform
Features
Copper and Fiber Auto-Negotiation
AutoCross™ on TP port
Link Pass Through
Remote Fault Detect
Loopback [pg 18]
Pause [pg 17]
Automatic Link Restoration
Field Upgradeable Firmware
The ION C3110 device provides an interface between 1000Base-T ports
and 1000Base-SX/LX ports allowing users to integrated fiber optic cabling
into 1000Base-T copper environments.
and 1000Base-SX/LX ports allowing users to integrated fiber optic cabling
into 1000Base-T copper environments.
Report converter status to chassis
management software:
• Copper and Fiber
link/receive status
• Hardware switch settings
• Receive error count
• Receive error count
Write operation includes:
• Power on/off device
• Auto-Negotiation enable/disable
• Remote Fiber Fault Detect
• Auto-Negotiation enable/disable
• Remote Fiber Fault Detect
enable/disable
• Link Pass Through enable/disable
• Pause enable/disable
• Symetric Pause
• Asymmetric TX Pause
• Asymetric RX Pause
• Pause enable/disable
• Symetric Pause
• Asymmetric TX Pause
• Asymetric RX Pause
The following manageable features are
available when used in an ION Platform
chassis along with an ION Management
Module.
available when used in an ION Platform
chassis along with an ION Management
Module.
Gigabit Ethernet
Can be used in any ION
Platform Chassis
Cost effective fiber deployment by
pairing C3110 with lower cost
1000Base-T switches, offering the
benefits of fiber without the
high costs
pairing C3110 with lower cost
1000Base-T switches, offering the
benefits of fiber without the
high costs
Standards based, will link with any
standard 1000Base-T and any stan-
dard 1000Base-SX or LX ports
dard 1000Base-SX or LX ports
The ION Platform
see also:
1000Base-T to 1000Base-SX/LX Stand-Alone Media Converters
1000BASE-T to 1000BASE-SX/LX
Slide-in-Module
Slide-in-Module