Справочник Пользователя для HP 120 G7 628691-001+481045-B2
Модели
628691-001+481045-B2
HP ProLiant DL120 G7 Models
NOTE: Memory configurations listed do not apply to "Factory Integrated Models".
Standard Memory
SATA Models:
2GB or 4GB of PC3-10600E DDR3 UDIMM running at 1333MHz with ECC capabilities memory installed.
SATA Models:
2GB or 4GB of PC3-10600E DDR3 UDIMM running at 1333MHz with ECC capabilities memory installed.
SAS Models
4GB of PC3-10600R UDIMM running at 1333MHz
Standard Memory Plus Optional Memory
Up to 16 GB memory is available with the optional installation of 4 x 4GB PC3-10600E UDIMM ECC DDR3 SDRAM DIMM Memory kits,
operating at 1333MHz when fully populated at 2 DIMMs per Channel in 4 slots.
4GB of PC3-10600R UDIMM running at 1333MHz
Standard Memory Plus Optional Memory
Up to 16 GB memory is available with the optional installation of 4 x 4GB PC3-10600E UDIMM ECC DDR3 SDRAM DIMM Memory kits,
operating at 1333MHz when fully populated at 2 DIMMs per Channel in 4 slots.
NOTE: The below chart does not represent all possible memory configurations.
NOTE: For best performance, it is recommended that customer installs memory in identical pairs (Slots 1 and 3 are interleaving pair.
Slots 2 and 4 are interleaving pair).
NOTE: For best performance, it is recommended that customer installs memory in identical pairs (Slots 1 and 3 are interleaving pair.
Slots 2 and 4 are interleaving pair).
Some DIMM installation guidelines are summarized below:
The HP ProLiant DL120 G7 Server has four memory slots
There are two channels per server with two DIMM slot per channel
Memory channel A consists of the two (2) DIMMs that are closest to the processor
Memory channel B consists of the two (2) DIMMs that are furthest from the processor
Different types of processors have different types of memory support.
Support for single/dual-rank 1066/1333 MT/s ECC UDIMM (unbuffered DIMMS)
The server supports up to 16 GB (4 x 4-GB) for Unbuffered DIMMs
No support for LV-DIMMs; RDIMMs; Non-ECC UDIMMs
Do not install DIMMs if the processor is not installed
Populate DIMMs from heaviest load (double-rank) to lightest load (single-rank)
Non-ECC DIMMs are not supported
Always use HP qualified DIMM
Farthest DIMM (either CHA or CHB) should always be populated first"
There are two channels per server with two DIMM slot per channel
Memory channel A consists of the two (2) DIMMs that are closest to the processor
Memory channel B consists of the two (2) DIMMs that are furthest from the processor
Different types of processors have different types of memory support.
Support for single/dual-rank 1066/1333 MT/s ECC UDIMM (unbuffered DIMMS)
The server supports up to 16 GB (4 x 4-GB) for Unbuffered DIMMs
No support for LV-DIMMs; RDIMMs; Non-ECC UDIMMs
Do not install DIMMs if the processor is not installed
Populate DIMMs from heaviest load (double-rank) to lightest load (single-rank)
Non-ECC DIMMs are not supported
Always use HP qualified DIMM
Farthest DIMM (either CHA or CHB) should always be populated first"
DDR3 memory options part number decoder
QuickSpecs
HP ProLiant DL120 Generation 7 (G7)
Memory
DA - 14009 North America — Version 17 — May 17, 2012
Page 29