Листовка для Transition Networks STGFF4848-100 STGFF4848-100-NA
Модели
STGFF4848-100-NA
Stand-Alone
The Transition Networks’ 10 Gigabit Ethernet fiber
to fiber converter is a two-port 10G pluggable media
converter, supporting a variety of XFP and SFP+
modules allowing network designers to utilize the
module to meet their network requirements.
The media converter can use either Transition Net-
works’ or third party MSA compatible 10G XFP or
SFP+ modules including support for the following
standards; 10GBase-SR, 10GBase-LR, 10GBase-ER,
10GBase-LRM, and 10GBase-ZR.
This converter provides 3R (reamplify, reshape, and
retime) optical signal regeneration.
to fiber converter is a two-port 10G pluggable media
converter, supporting a variety of XFP and SFP+
modules allowing network designers to utilize the
module to meet their network requirements.
The media converter can use either Transition Net-
works’ or third party MSA compatible 10G XFP or
SFP+ modules including support for the following
standards; 10GBase-SR, 10GBase-LR, 10GBase-ER,
10GBase-LRM, and 10GBase-ZR.
This converter provides 3R (reamplify, reshape, and
retime) optical signal regeneration.
Device
Device
Specifications
Standards
IEEE Std. 802.3ae, IEEE 802.3ak, IEEE 802.3ag, IEEE
802.3, IEEE 802.3x, Multisource Agreement (MSA) XFP
and SFP+
Data Rate
10 Gbps
Status LED
PWR (power): GREEN- power on
1LNK- fiber #1 link: GREEN- On link
1ACT- fiber #1 activity/fault: GREEN- BLINK activity,
YELLOW-
Fault
2LNK- fiber #2 link: GREEN- On link
2ACT- fiber #2 activity/fault: GREEN- BLINK activity,
YELLOW-
Fault
DIP Switches
SW1- Port 1 mode
UP: Limiting (xR); DOWN: Linear (LRM)
SW2- Port 2 mode
UP: Limiting (xR); DOWN: Linear (LRM)
SW3- LPT
UP: Enabled; DOWN: Disabled
SW4-
Interface loopback, forces each fiber to loop its RX to TX
Dimensions
Width: 1.72” [44 mm]
Depth: 5.0” [127 mm]
Height: 3.4” [86 mm]
Power Consumption
7 Watts
Power Supply
12 VDC barrel
Environment
0 to 50º C, dependant on ratings
of the XFP and SFP+ modules used
Shipping Weight
1 lb. [0.45 kg]
Regulatory Compliance
FCC Class A, EN55024 (CISPR22) Class A; CE Mark;
EN55022 Class A
Warranty Lifetime
STGFFxxxx-100
STGFFxxxx-100
stand-alone media converter
10 Gigabit Ethernet Fiber to Fiber Converter
Features
4
Supports 10 Gigabit Ethernet Fiber to Fiber
full duplex conversion
4
LED Link Status Indicators
4
Link Pass Through
4
Full Duplex
4
Auto Link Restore [pg 18]
4
Loopback
4
Supports +5V, +3.3V, and +1.8V MSA
compliant XFP modules
4
Supports 3R (Reamplify, Reshape, and
Retime) optical signal regeneration
10 Gigabit Ethernet Fiber to Fiber
Converter Application
Converter Application
Features
4
Supports 10 Gigabit Ethernet Fiber to Fiber
full duplex conversion
4
LED Link Status Indicators
4
Link Pass Through
4
Full-Duplex
4
Automatic Link Restoration
4
Loopback
4
Supports +5V, +3.3V, and +1.8V MSA
compliant XFP modules
4
Supports 3R (Reamplify, Reshape, and
Retime) optical signal regeneration
4
Supports 10GBase-CX4 modules in the
STGFF4747-100
10GBase to 10GBase Optical Line Converter with XFP Slots
see also:
Point System™ 10G Slide-In-Module Optical Line Converters
Ordering Information
STGFF4747-100
(2) Port 10GBase-xx open XFP
to Open XFP
STGFF4848-100
(2) Port 10GBase-xx open SFP+
to Open SFP+
Optional Accessories (sold separately)
SFP+ Modules
TN-10GSFP-LR1
10GBase-LR/LW, SFP+
w/ Digital Diagnostics (DMI) 1310 DFB nm
[10 km/6.2 mi.] Link Budget: 6.4 dB
TN-10GSFP-LR2
10GBase-LR/LW, SFP+
w/ Digital Diagnostics (DMI) 1310 DFB nm
[20 km/12.4 mi.] Link Budget: 11.4 dB
TN-10GSFP-LR4
10GBase-LR/LW, SFP+
w/ Digital Diagnostics (DMI) 1310 DFB nm
[40 km/24.8 mi.] Link Budget: 16.5 dB
TN-10GSFP-LR7
10GBase-LR/LW, SFP+
w/ Digital Diagnostics (DMI) 1310 DFB nm
[70 km/43.4 mi.] Link Budget: 25 dB
TN-10GSFP-SR
10GBase-LR/LW, SFP+
w/ Digital Diagnostics (DMI) 850 DFB nm
[300/82/33 m; 985/269/108 ft.]
Link Budget: 2.6 dB
XFP Modules
TN-XFP-SR
10GBase-SR/SW/10G Fibre Channel, XFP
w/ Digital Diagnostics (DMI) 850nm (LC)
[62.5/125 uM: 33 m/108 ft.]
[50/125 uM with 500 MHZ-km: 269 ft.]
[50/125 uM: 300 m/985 ft.]
Modal dispersion 39.cB
TN-XFP-LR1
10GBase-LR/LW/10G Fibre Channel, XFP
w/ Digital Diagnostics (DMI) 1310nm (LC)
[10 km/6.2 mi.] Link Budget: 6.2 dB
TN-XFP-LR2
10GBase-LR/LW/10G Fibre Channel, XFP
w/ Digital Diagnostics (DMI) 1310nm (LC)
[20 km/12.4 mi.] Link Budget: 12.0 dB
TN-XFP-ER
10GBase-LR/ER/10G Fibre Channel, XFP
w/ Digital Diagnostics (DMI)1310nm (LC)
[40 km/24.9 mi.]Link Budget: 16.5 dB
TN-XFP-ZR
10GBase-LR/ER/10G Fibre Channel, XFP
w/ Digital Diagnostics (DMI) 1550nm (LC)
[80 km/49.7 mi.] Link Budget: 23.0 dB
Mounting Options
WMBD
DIN Rail Bracket 5.0” [127 mm]
WMBD-F
DIN Rail Bracket (flat) 3.3” [84 mm]
WMBL
Wall Mount Bracket 4.0” [102 mm]
WMBV
Vertical Wall Mount Bracket 5.0” [127 mm]
Wide Input (24 - 60 VDC) Power Supplies
SPS-2460-SA
Stand-Alone Power Supply
10GBase to 10GBase Optical Line Converter with XFP Slots