Листовка для Kramer Electronics DVI-A/5xBNC, 4.6m C-DMA/5BM-15
Модели
C-DMA/5BM-15
C-DMA/5BM
DVI
−
A to 5 BNC Breakout Cable
Kramer’s DMA/5BM series DVI male to 5
BNC male are cables designed to adapt
between the analog pins of DVI
BNC male are cables designed to adapt
between the analog pins of DVI
−
I and typical
RGBHV. DVI video cards often output signals
in both digital and analog format and,
conversely, display devices often accept an
analog RGBHV type signal using a DVI
connector.
in both digital and analog format and,
conversely, display devices often accept an
analog RGBHV type signal using a DVI
connector.
Quality Construction
- Rugged cable with molded connectors and gold
−
plated pins.
Compatibility
- Use this adapter when you need access to the analog signal present at a DVI
−
I source, or when you
need to connect analog RGBHV to a display that provides only a DVI
−
I input. Note that this adapter does not convert
analog to digital or digital to analog. Always verify compatibility details for the source/destination in your application.
Varied Selection of Lengths
- Available in versions of 0.9 to 4.6m (3, 6, 10 and 15ft).
FEATURES
Model
Description
LengthMeter
Male - Male
C-DMA/5BM-3
DVI-A (M) to 5 BNC (M) Molded Breakout Cable
3'
0.9M
C-DMA/5BM-6
DVI-A (M) to 5 BNC (M) Molded Breakout Cable
6'
1.8M
C-DMA/5BM-10
DVI-A (M) to 5 BNC (M) Molded Breakout Cable
10'
3.0M
C-DMA/5BM-15
DVI-A (M) to 5 BNC (M) Molded Breakout Cable
15'
4.6M