Manualsbrain.com
  1. Инструкции и руководства
  2. Бренды
  3. Transition Networks
  4. C2110-1019
  5. Листовка

Листовка для Transition Networks C2110-1019

Скачать
Страница из 1
The ION Platform
Specifications
Standards 
          IEEE Std. 802.3
Data Rate 
          100 Mbps, Layer-1
Switches 
        
  SW1: Auto-Negotiation (UP = enabled)  
          
SW2: Pause (UP=enabled) 
          
SW3: Link Pass Through (UP = enabled) 
          
SW4: Far-End-Fault (UP = enabled) 
Internal Jumpers 
          AutoCross™: Enable/Disable
Hardware/Software Jumpers        
Hardware: Mode of operation is determined by the  
          settings on the 4-position switch  
          
Software: Mode of operation is determined by the  
   
          most recently saved on-board microprocessor settings
Status LEDs 
          
PWR (Power): ON = Connection to powered backplane 
        
  LKC (Copper Link): ON = Copper Link 
 
          
RXC (Receive Copper): Blinking = Data recieved on  
          Copper link 
 
 
 
          
LKF (Fiber Link): ON = Fiber Link  
 
         
 RXF (Receive Fiber): Blinking = Data received on 
          Fiber Link
Dimensions 
          
Width: 0.86” [22 mm] 
          
Depth: 6.5” [165 mm] 
          
Height: 3.4” [86 mm]
Power Consumption 
          2.5 Watts, 200 mA @ 13.9 VDC
Environment 
          See chassis specifications
Shipping Weight 
          1 lb. [.45 kg]
Regulatory Compliance  
          CISPR/EN55022 Class A, FCC Class A, CE Mark
Warranty 
          Lifetime
C2110 Series
C2110 Series
Fast Ethernet Media Converter 
100BASE-TX to 100BASE-FX
Fiber Integration in 10/100 Copper Environments
The ION C2110 device provides an interface between 100Base-TX 
ports and 100Base-FX ports allowing users to integrate fiber optic ca-
bling into 100Base-TX copper environments.
Fast Ethernet
slide-in-module for the ion platform
see also: 
Fast Ethernet 100BASE-TX to 100BASE-FX  Stand-Alone Media Converters
4
 Report converter status to 
     chassis management software: 
      • TP and Fiber Link Status
      • Hardware switch settings
      • Fault condition
      • TP cable length
4
 Write operation includes:
      • Power on/off device
      • Auto-Negotiation enable/disable 
         
      • Pause enable/disable 
      • LPT enable/disable 
      • FEF enable/disable 
      • AutoCross enable/disable [
Features
4
Auto-Negotiation of speed 
      and duplex on TP port 
4
AutoCross ™ on TP port [
4
Link Pass Through (LPT1) 
    fault monitoring 
4
Far-End-Fault (FEF) detection 
4
Automatic Link Restoration 
4
Pause advertisement 
4
Field Upgradeable Firmware 
4
Can be used in any 
    ION Platform Chassis
4
Standards based, will link with any 
    Standard 100Base-TX and any 
    Standard 100Base-FX ports
The following manageable features are 
available when used in an ION chassis 
along with an ION Management Module
Ordering Information 
C2110-1011
  100BASE-TX (RJ-45) 
[100 m/328 ft.]
to  100BASE-FX 1300nm MM (ST) 
[2 km/1.2 mi.] Link Budget: 11.0 dB
C2110-1013
  100BASE-TX (RJ-45) 
[100 m/328 ft.]
to  100BASE-FX 1300nm MM (SC) 
[2 km/1.2 mi.] Link Budget: 11.0 dB
C2110-1039
  100BASE-TX (RJ-45) 
[100 m/328 ft.]
to  100BASE-FX 1300nm MM (LC) 
[2 km/1.2 mi.] Link Budget: 11.0 dB
C2110-1014
  100BASE-TX (RJ-45) 
[100 m/328 ft.]
to  100BASE-FX 1300nm SM (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
C2110-1019
  100BASE-TX (RJ-45) 
[100 m/328 ft.]
to  100BASE-FX 1300nm SM (LC)
[20 km/12.4 mi.] Link Budget: 17.3 dB
C2110-1015
  100BASE-TX (RJ-45) 
[100 m/328 ft.]
to  100BASE-FX 1300nm SM (SC)
[40 km/24.9 mi.] Link Budget: 29.0 dB
C2110-1016
  100BASE-TX (RJ-45) 
[100 m/328 ft.]
to  100BASE-FX 1300nm SM (SC)
[60 km/32.3 mi.] Link Budget: 29.0 dB
C2110-1017
  100BASE-TX (RJ-45) 
[100 m/328 ft.]
to  100BASE-FX 1550nm SM (SC)
[80 km/49.7 mi.] Link Budget: 29.0 dB
C2110-1035
  100BASE-TX (RJ-45) 
[100 m/328 ft.]
to  100BASE-FX 1550nm SM (SC)
[120 km/77.5 mi.] Link Budget: 36.0 dB
C2110-1040
  100BASE-TX (RJ-45) 
[100 m/328 ft.]
to  100Base-X SFP Slot (empty)
 
Single Fiber Products
 
 
Recommended use in pairs 
C2110-1029-A1
  100BASE-TX (RJ-45) 
[100 m/328 ft.]
to  100BASE-FX 1310nm TX/1550nm RX  
single fiber single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
C2110-1029-A2
  100BASE-TX (RJ-45) 
[100 m/328 ft.]
to  100BASE-FX 1550nm TX/1310nm RX  
single fiber single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
C2110-1029-B1
  100BASE-TX (RJ-45) 
[100 m/328 ft.]
to  100BASE-FX 1310nm TX/1550nm RX  
single fiber single mode (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
C2110-1029-B2
  100BASE-TX (RJ-45) 
[100 m/328 ft.]
to  100BASE-FX 1550nm TX/1310nm RX  
single fiber single mode (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB