Листовка для Transition Networks Point System CVIDF2013-155

Модели

CVIDF2013-155

Transition Networks, Inc.
Worldwide Headquarters:
10900 Red Circle Drive
Minnetonka, MN 55343 USA

tel: 952.941.7600 / 800.526.9267
fax: 952.941.2322
info@transition.com
http://www.transition.com

©2009 Transition Networks, Inc.
All trade marks are the property of their respective owners.
Technical information is subject to change without notice.

LINK PASS THRU

Ordering Info

CVIDF2011-150: Video Receiver (single)

BNC (75 ohm)

to Multimode (ST)

[1 km / 0.6 mi.] (normal mode)

[2 km / 1.2 mi.] (extended mode)

CVIDF2011-155: Video Receiver (dual)

(2) BNC (75 ohm)

to (2) Multimode (ST)

[1 km / 0.6 mi.] (normal mode)

[2 km / 1.2 mi.] (extended mode)

CVIDF2013-150: Video Receiver (single)

BNC (75 ohm)

to Multimode (SC)

[1 km / 0.6 mi.] (normal mode)

[2 km / 1.2 mi.] (extended mode)

CVIDF2013-155: Video Receiver (dual)

(2) BNC (75 ohm)

to (2) Multimode (SC)

[1 km / 0.6 mi.] (normal mode)

[2 km / 1.2 mi.] (extended mode)

CVIDF2012-150: Video Receiver (single)

BNC (75 ohm)

to Single Mode (ST)

[10 km / 6.2 mi.] (normal mode)

[20 km / 12.4 mi.] (extended mode)

CVIDF2012-155: Video Receiver (dual)

(2) BNC (75 ohm)

to (2) Single Mode (ST)

[10 km / 6.2 mi.] (normal mode)

[20 km / 12.4 mi.] (extended mode)

Connect Uni-Directional Analog Video Devices Over Fiber

CVIDF20xx-15x

point system™ slide-in-module network interface device

Transition Networks Point System™ Chassis Video Media Receiver, when paired
with our camera-mounted transmitter J/VD-TX-01, enables the transport of
analog CCTV video over fiber infrastructure for extended reach video surveil-
lance or security installations. And with Transition’s unique

Extended Fiber

Receive Mode, the RX sensitivity can be adjusted to accommodate even
greater fiber link distances.

The chassis card is available in either a single video channel or the dual video
channel configuration, allowing for density flexibility that can be tailored to your
application. All video conversion is performed in real time and the

Automatic

Gain Control feature automatically adjusts the video contrast and brightness
to maintain the quality and integrity of the original video stream.

Analog CCTV Video: NTSC, PAL, SECAM

Copper to Fiber

Analog CCTV Video Copper to Fiber Media Converter

Features

AM Modulation

NTSC, PAL, SECAM

compatibility

Compatible with all video

CCTV equipment

Real Time Full Color Video

Automatic Gain Control

Video Specification:

• Input Video: .5 to 2-volt

pk-pk (75 ohms)

• Bandwidth: 5 Hz – 10 MHz
• Differential Gain: < 5 %
• Differential Phase: < 5°
• Tilt: < 1%
• Signal/Noise Ratio: 60dB

Extended Fiber Receive Mode

Single or Dual Video Channel

configurations

Specifications

Video Formats

NTSC, PAL, SECAM

Optical Specs

Multimode: 850nm
6.0 dB Link Budget or
11.0 dB Link Budget

Single Mode: 1310nm
10.0 dB Link Budget or
15.0 dB Link Budget

Status LEDs

PWR (Power): ON = power connected
RX1: ON=Fiber Video feed in Channel 1
RX2: ON = Fiber Video feed in Channel 2 (dual only)

Jumpers

JP1: Normal/Extended Mode (Circuit 1)
JP5: Normal/Extended Mode (Circuit 2)

Dimensions

Width: 0.86" [22 mm]
Depth: 5.0" [127 mm]
Height: 3.4" [86 mm]

Power Consumption

2 watts (single card)
3 watts (dual card)

Environment

See chassis specifications

Shipping Weight

1 lb. [0.45 kg]

Regulatory Compliance

FCC Class A, EN55022 Class A, EN55024, CE Mark

Warranty

Lifetime