Справочник Пользователя для HP 120 G7 628691-001+COMPON

NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO
product offerings and requirements.
NOTE: HP does not allow factory integration of options into standard models listed above. Configure-to-order servers must start with
a CTO Chassis.
NOTE: FIO indicates that this option only available as a Factory Installable Option.

HP ProLiant DL120 G7 Pluggable 4 LFF Configure-to-order Server

NOTE: Supports up to four large form factor (3.5-inch) hard drives.

647339-B21

 

Embedded NC112i Gigabit Server Adapter (x2)

 

1 full length PCI Express Gen2 x16 slot (x16 connector) and 1 half length low profile PCI
Express x4 slot (x8 connector)

 

HP Integrated Lights-Out Standard (iLO 3)

 

HP Smart Array B110i SATA RAID Controller (RAID 0/1/1+0)

 

Rack (1U) form factor, (1.75 in/44.45 mm)

 

One Highline IEC Power Cord

 

4 Non-Hot Plug Fans

 

Fixed, mounting rails

 

 

 

HP ProLiant DL120 G7 Hot Plug 8 SFF Configure-to-order Server

NOTE: Supports up to eight small form factor (2.5-inch) hard drives.

647340-B21

NOTE: This configuration requires the HP Smart Array P410 Controller be purchased
separately to support 8SFF HDDs.

 

 

Embedded NC112i Gigabit Server Adapter (x2)

 

1 full length PCI Express Gen2 x16 slot (x16 connector) and 1 half length low profile PCI
Express x4 slot (x8 connector)

 

HP Smart Array B110i SATA RAID Controller (RAID 0/1/1+0)

 

Rack (1U) form factor, (1.75 in/44.45 mm)

 

One Highline IEC Power Cord

 

4 Non-Hot Plug Fans

 

Fixed, mounting rails

 

DA - 14009   North America — Version 17 — May 17, 2012

Page  15