Листовка для Transition Networks C3210-1015
The ION Platform
Specifications
Standards
IEEE 802.3, IEEE Std. 802.3ab, IEEE 802.3u, IEEE
802.3z, IEEE 802.3p, IEEE 802.3q
Data Rate
10/100/1000 Mbps; Layer-2
Max Frame Size
10,240 Bytes (jumbo frame support)
1,632 Bytes when linked to an xGFEB10xx-120
Switches
SW1: TP Auto-Negotiation
SW2: TP Speed
SW3: TP Duplex
SW4: Link Pass Through
SW5: Fiber Duplex
SW6: Unused
Hardware/SoftwareJumpers Hardware/Software mode, AutoCross™
Status LEDs
Status LEDs
PWR (Power): ON = Connection to powered backplane
LACT (Fiber Link): ON = Fiber link, Blinking = activity
UTP Duplex/Link: Orange = half duplex link, Blinking =
half duplex activity, Green = Full duplex link, Blinking =Full
duplex activity, Off = 10 Mbps operation (or no link),
Orange = 100 Mbps operation, Green = 1000 Mbps operation
duplex activity, Off = 10 Mbps operation (or no link),
Orange = 100 Mbps operation, Green = 1000 Mbps operation
Dimensions
W: 0.86” [22 mm]; D: 6.5” [165 mm]; Ht: 3.4” [8 6 mm]
Power Consumption
3.6 Watts, 300mA @ 12 VDC
Environment
See chassis specifications
Shipping Weight
1 lb [.45 kg]
Regulatory Compliance
CISPR/EN55022 Class A, EN55024, EN61000,
FCC Class A, CE Mark
Warranty
Lifetime
C3210 Series
C3210 Series
slide-in-module for the ion platform
10/100/1000BASE-T to 1000BASE-SX/LX
Slide-in-Module
4
Intergrate fiber into copper based net-
working environments
working environments
4
Can be used in any ION
Platform Chassis
4
Bridging legacy 10/100 devices into a
Gigabit Backbone
4
Secure Uni-directional transmission
4
Standards based, will link with any
standard 10/100/1000Base-T and any
standard 1000Base-SX or LX ports
standard 1000Base-SX or LX ports
The following manageable features are
available when used in an ION Platform
chassis along with an ION Management
Module:
available when used in an ION Platform
chassis along with an ION Management
Module:
Features
4
Copper and Fiber Auto-Negotiation
4
Switch Selectable Speeds
4
AutoCross™ [
4
Link Pass Through
4
Remote Fault Detect
4
Pause
4
Automatic Link Restoration
4
IEEE 802.1P QoS, IPv4 TOS/Diffserv,
IPv6 traffic class
4
IEEE 802.1q Port VLAN, tagging and
doubling tagging (Q in Q)
4
Field Upgradeable Firmware
4
Virtual Cable Test on UTP port
4
Uni-directional data transmission
4
Bandwidth Allocation
4
DMI, digital diagnostics per SFF-8472
4
RMON counters for each port
Report devices status to
chassis management software:
4
Copper and Fiber link status
4
Copper and Fiber Port Duplex
4
Copper Port Speed
4
Hardware switch settings
Write operation includes:
4
Set copper full/half duplex
4
Set copper connection speed
4
Enable/Disable: Link pass Through,
Auto-Negotiation, Port VLAN
4
Set Administrative State
4
Set Egress and Ingress rate limits
4
Reset Factory Defaults, Counters
4
Reset Switch
4
Set Speed
4
Set Duplex
4
Set MDI/MDI-X/Auto
4
Set Pause Operations
4
Set VLAN Tagging
4
Set Default Priority
4
Set IEEE priority remapping
4
Initiate Virtual Cable Test
4
Set Fiber RX Power
Intrusion Threshold
Gigabit Ethernet
see also:
10/100/1000Base-T to 1000Base-SX/LX Stand-Alone Media Converters
The ION C3210 device provides an inter-
face between 10/100/1000Base-T ports
and 1000Base-SX/LX ports allowing
users to integrate fiber optic cabling into
10/100/1000Base-T copper environments.
Ordering Information
C3210-1013
10/100/1000BASE-T (RJ-45)
[100 m]
to 1000BASE-SX 850nm MM (SC)
[62.5/125 µm fiber: 220 m/722 ft.]
[50/125 µm fiber: 550 m/1804 ft.]
Link Budget: 8.5 dB
C3210-1024
10/100/1000BASE-T (RJ-45)
[100 m]
to 1000BASE-SX 1310nm extended MM (SC)
[2 km/1.2 mi.] Link Budget: 7.0 dB
C3210-1014
10/100/1000BASE-T (RJ-45)
[100 m]
to 1000BASE-LX 1310nm SM (SC)
[10 km/6.2 mi.] Link Budget: 10.5 dB
C3210-1015
10/100/1000BASE-T (RJ-45)
[100 m]
to 1000BASE-LX 1310nm SM (SC)
[25 km/15.5 mi.] Link Budget: 15.0 dB
C3210-1017
10/100/1000BASE-T (RJ-45)
[100 m]
to 1000BASE-LX 1550nm SM (SC)
[65 km/40.4 mi.] Link Budget: 21.0 dB
C3210-1035
10/100/1000BASE-T (RJ-45)
[100 m]
to 1000BASE-LX 1550nm SM (SC)
[125 km/77.5 mi.] Link Budget: 27.0 dB
C3210-1040
10/100/1000BASE-T (RJ-45)
[100 m]
to 1000Base-X SFP Slot (empty)
Single Fiber Products
Recommended use in pairs
C3210-1029-A1
10/100/1000BASE-T (RJ-45)
[100 m]
to 1000BASE-LX 1310nm TX/1550nm RX
single fiber single mode (SC)
[20 km/12.4 mi.] Link Budget: 13.0 dB
C3210-1029-A2
10/100/1000BASE-T (RJ-45)
[100 m]
to 1000BASE-LX 1550nm TX/1310nm RX
single fiber single mode (SC)
[20 km/12.4 mi.] Link Budget: 13.0 dB
C3210-1029-B1
10/100/1000BASE-T (RJ-45)
[100 m]
to 1000BASE-LX 1310nm TX/1550nm RX
single fiber single mode (SC)
[40 km/24.9 mi.] Link Budget: 20.0 dB
C3210-1029-B2
10/100/1000BASE-T (RJ-45)
[100 m]
to 1000BASE-LX 1550nm TX/1310nm RX
single fiber single mode (SC)
[40 km/24.9 mi.] Link Budget: 20.0 dB
C3210-1029-D1
10/100/1000BASE-T (RJ-45)
[100 m]
to 1000BASE-LX 1510nm TX/1590nm RX
single fiber single mode (SC)
[80 km/49.7 mi.] Link Budget: 24.0 dB
C3210-1029-D2
10/100/1000BASE-T (RJ-45)
[100 m]
to 1000BASE-LX 1590nm TX/1510nm RX
single fiber single mode (SC)
[80 km/49.7 mi.] Link Budget: 24.0 dB