Листовка для Cresta WX388

Norvegia N

45

47

48

49

50

51

52

53

54

55

56

57

58

59

60

KSPO:1667-09(SAC)
cresta TE388NL & TS02X MANUAL(ENG)
SIZE:W65 X H105(mm)
BY C Y WU  4/03/10

F

Toggle for setting temperature display unit °C or °F

The time is displayed in hour-minute format

-5°C to + 50°C/

23°F to 122°F

-10°C to + 60°C/

14°F to 140°F

198g

60g

88 x 185 x 28 mm

55.5 x 101 x 24 mm

And Norway

2g) LOW BATTERY WARNING: MAIN UNIT
When it is time to replace batteries, the respective

low-battery indicator [     ] next to the time with 
seconds will be shown on the main unit’s display.

2f) LOW BATTERY WARNING: REMOTE UNIT
When it is time to replace batteries, the respective 
low-battery indicator [     ] next to the outdoor 
temperature will be shown on the main unit’s display.

Snowy

Note: If you press[MEM] now, the maximum and 

minimum readings will have the same values as the 

current ones until different readings are recorded.

To set clock manually, hold MODE button for 3 seconds, 

the day of the week abbreviation will be flashing. 

Press the  [ ▼ ] or  [ ▲ ] button to select 

between English, German, French, Italian, Spanish,

Dutch and Swedish.

Press MODE button to confirm. Repeat the same 

procedure to set year digit, month digit, date digit, 

calendar format, hour format, hour digit and minute digit.

When you finished, press MODE button to exit and

the display will be returned to the clock mode.

To set the zone time, press MODE until at zone time

display mode.

Hold MODE button for 3 seconds, the time zone offset

will be displayed.

Press the  [ ▼ ] or  [ ▲ ] button to enter offset

interval from - 13:00 to + 15:00 hours to the current time.

Press MODE button to confirm and exit.

This is a repeat alarm that will activate daily from 

Monday to Friday at a set time. When alarm is on, alarm 

icon [        ] will be flashing.
Single Alarm

This is a single alarm that will activate once on Sat or 

Sun at a set time.

When alarm is on, alarm that will activate once on Sat or 

Sun at a set time.

When alarm is on, alarm icon[       ] will be flashing.

6. Press [ ALARM ] to exit and the respective alarm 

    icons [        ] and [       ] will be activated.

1. Press [ ALARM ] button to stop the alarm immediately.

2. To turn off the alarm, press  [ ▼ ] or  [ ▲ ] button to

    change the alarm time display as “OFF”.

3. If no button is pressed, the alarm will be sounded for 2

    minutes and then deactivated automatically.