Справочник Пользователя для IBM Flex System EN2092 1Gb Ethernet Scalable Switch 49Y4294
Модели
49Y4294
IBM Flex System EN2092 1Gb Ethernet Scalable Switch
9
Supported chassis and adapter cards
The switches are installed in switch bays in the rear of the IBM Flex System Enterprise Chassis, as
shown in the following figure. Switches are normally installed in pairs because I/O adapter cards installed
in the compute nodes route to two switch bays for redundancy and performance.
shown in the following figure. Switches are normally installed in pairs because I/O adapter cards installed
in the compute nodes route to two switch bays for redundancy and performance.
Figure 2. Location of the switch bays in the IBM Flex System Enterprise Chassis
The connections between the adapters installed in the compute nodes to the switch bays in the chassis
are shown diagrammatically in the following figure. The figure shows both half-wide servers, such as the
x240 with two adapters, and full-wide servers, such as the p460 with four adapters.
are shown diagrammatically in the following figure. The figure shows both half-wide servers, such as the
x240 with two adapters, and full-wide servers, such as the p460 with four adapters.
Figure 3. Logical layout of the interconnects between I/O adapters and I/O modules
The IBM Flex System EN2092 Scalable Switch can be installed in bays 1, 2, 3, and 4 of the Enterprise