Справочник Пользователя для Avaya 3510GT AL3500B04-E6
Модели
AL3500B04-E6
individual units in a stack without
impacting traffic, the ability to
support link aggregation across the
stack - increasing resiliency, and
through subsecond recovery in the
event of a link or unit failure.
The Avaya Ethernet Routing
Switch 3500 Series delivers high
performance Layer 2 switching, Layer
3 local and static routing, advanced
convergence features and a wide
range of security features including
comprehensive support for IEEE
802.1x for secure network access
control. They are designed to simplify
operations by automating many of
today’s manual processes, while
keeping costs low for cost conscious
SMEs and for remote office
deployments.
Simplified Operations
Typically in smaller environments
there is little to no local IT staff.
Therefore, equipment purchased to
run in these locations must be simple
to install, manage and operate. The
ERS 3500 is well suited for these
environments. When deployed in
conjunction with an Avaya IP Office
system the ERS 3500 can offer
increased operational simplicity over
third party switching solutions
through features that simplify both
the initial deployment as well as
ongoing adds, moves and changes.
Validated interoperability with
Avaya IP Office
Avaya IP Office
To simplify converged deployments
for SMEs and remote offices, Avaya
has validated interoperability
between the ERS 3500 and the IP
Office system. This ensures that the
two products work together
seamlessly when they are deployed
together – eliminating complexities
associated with having to provision,
manage and troubleshoot a third
party switch with the Avaya voice /
unified communications
infrastructure. A technical solutions
guide, available to partners and end
customers, showcases best practice
configurations, ensuring optimal
performance of the solution.
Certified 1-minute plug-and-play
for IP phones
for IP phones
Plug and play means that as soon as
an IP phone is plugged into an Avaya
Ethernet switch, the IP phone is
automatically recognized and
configured. This feature can
dramatically simplify the roll out of IP
phones and simplify ongoing adds,
moves and changes; empowering
employees to move their own phones
without the assistance of an outside
contractor. To enable this plug and
play capability, Avaya offers IEEE
802.1AB Link Layer Discovery
Protocol and LLDP-Media Endpoint
Discovery (LLDP-MED) as well as the
Avaya Auto Discovery and Auto
Configuration (ADAC) feature.
2
|
avaya.com
The ERS 3500 Series models
Fast Ethernet Models
ERS 3526T
24 x 10/100Mbps + 2 Combo 10/100/1000 or SFP ports +
2 SFP / 2.5G rear ports. Fanless.
2 SFP / 2.5G rear ports. Fanless.
ERS 3526T-PWR+
24 x 10/100Mbps PoE+ ports + 2 Combo 10/100/1000 or
SFP ports + 2 SFP / 2.5G rear ports. PoE budget 370W.
SFP ports + 2 SFP / 2.5G rear ports. PoE budget 370W.
Gigabit Ethernet Models
ERS 3510GT
8 x 10/100/1000Mbps + 2 SFP ports. Standalone, fanless.
ERS 3510GT-PWR+
8 x 10/100/1000Mbps PoE+ ports + 2 SFP ports.
Standalone. Fanless mode @ 60W PoE budget, Fan
operation mode @ 170W PoE budget.
Standalone. Fanless mode @ 60W PoE budget, Fan
operation mode @ 170W PoE budget.
ERS 3524GT
24 x 10/100/1000Mbps with 4 shared SFP ports (combo
with ports 21-24) + 2 SFP / 2.5G rear ports.
with ports 21-24) + 2 SFP / 2.5G rear ports.
ERS 3524GT-PWR+
24 x 10/100/1000Mbps PoE+ ports with 4 shared SFP
ports (combo with ports 21-24) + 2 SFP / 2.5G rear ports.
PoE budget 370W.
ports (combo with ports 21-24) + 2 SFP / 2.5G rear ports.
PoE budget 370W.
Figure 2: ERS 3500 with IP Office, the Avaya Flare® Communicator for
iPad Device and an Avaya 9600 handset