Листовка для Rose CrystalView Extreme CRK-1DTXT-EX45/A1
Модели
CRK-1DTXT-EX45/A1
Phone: 281-933-7673
E-mail: sales@rose.com
10707 Stancliff Rd. Houston, TX 77099
Rose Electronics – Europe: +49 (0
)
2454 969442 Rose Electronics – Asia: +65 6324 2322
DS-CRVDVIEXT 1.2
Copyright 2010 Rose Electronics. All rights reserved
W W W . R O S E . C O M
Typical Application
Control your designated computer from anywhere on your LAN
(Connection / communication is via MAC address - Transmitter to Receiver)
Specifications
Dimensions
Width
Depth
Height
(in)
(mm)
(mm)
6.9
175
4.4
112
1.18
30
Distance
Determined by LAN configuration
(330 feet when installed in a point-to-
point configuration)
Resolution
1680 x 1050
Connectors
Local DVI-D (Video in)
Local DVI-D (Video in)
USB Type B
Link RJ45
Power +5VDC, 3A power adapter
Remote DVI-D (Video out)
3.5mm audio out (headphones)
3.5mm audio in (microphone)
Link RJ45
(3) USB Type A
Power +24VDC, 1A power adapter
Indicators
Transmitter Pair – Button (Reserved)
Transmitter Pair – Button (Reserved)
Status – Green LED
Link – Green LED
Video – Green / Amber LED
USB – Green / Amber LED
Receiver Pair – Button (Reserved)
Status – Green LED
Link – Green LED
Video – Green / Amber LED
USB – Green / Amber LED
Power
Transmitter +5V DC / 3.0A
Receiver +24V DC / 1A
Receiver
500mA per USB output port (3)
output
at each USB port.
Environment Operating Temp. 32°F-122°F (0°C-50°C)
Approvals
Approvals
FCC Class B, CE Class B, IC Class B
Rear View
Transmitter
Receiver
Overview
The CrystalView Extreme extender
operates as a matched pair consisting of a transmitter
unit and a receiver unit. The transmitter unit connects
unit and a receiver unit. The transmitter unit connects
to your computer and the receiver unit connects to your
workstation. The transmitter and receiver units are
connected to your corporate LAN using standard CAT5
cable and communicates at MAC address level. The
receiver unit supports up to 4 USB hubs for adding
additional USB devices.
workstation. The transmitter and receiver units are
connected to your corporate LAN using standard CAT5
cable and communicates at MAC address level. The
receiver unit supports up to 4 USB hubs for adding
additional USB devices.
Installation
Installing the CrystalView Extreme
extender is as simple as connecting the computer to the
transmitter unit, connecting the receiver unit to your
transmitter unit, connecting the receiver unit to your
workstation equipment and connecting the transmitter
and receiver to your LAN system with CAT5 cable.
Up to 30 CrystalView Extreme systems (Transmitter /
Receiver pair) can be installed on your corporate
network LAN.
(30 systems on a1Gbps LAN, 3 systems on a 100Mbps
LAN)
The CrystalView Extreme can also be connected via a
single CATx cable from the transmitter to the receiver
and receiver to your LAN system with CAT5 cable.
Up to 30 CrystalView Extreme systems (Transmitter /
Receiver pair) can be installed on your corporate
network LAN.
(30 systems on a1Gbps LAN, 3 systems on a 100Mbps
LAN)
The CrystalView Extreme can also be connected via a
single CATx cable from the transmitter to the receiver
for standalone KVM extension up to 330 feet.
Expanding with a USB hub
In addition to the three
USB ports on the receiver unit, you can add up to 4
standard USB hubs to the receiver unit to access
additional USB devices. Connecting 4 USB hubs to the
receiver will increase the number of USB devices that
can be connected to a maximum of 13 devices and 4
hubs.
standard USB hubs to the receiver unit to access
additional USB devices. Connecting 4 USB hubs to the
receiver will increase the number of USB devices that
can be connected to a maximum of 13 devices and 4
hubs.
Part Numbers
CRK-1DTXT-EX45/A1 Transmitter / Receiver Kit
RM-CRV-EX/19
RM-CRV-EX/19
RackMount Kit