Справочник Пользователя для Omnitron iConverter 4xT1/E1 MUX/M 8823N-3-C
Модели
8823N-3-C
iConverter
iConverter
®
Multiplexes four independent T1 or E1 channels from
■
copper links into one fiber link
10/100/1000 copper Ethernet multiplexed with T1/E1
■
circuits
Small Form Pluggable (SFP) or fixed-fiber transceivers,
■
in standard and CWDM wavelengths
Supports multimode, single-mode dual fiber, single-
■
mode single-fiber
Remotely-managed configuration and testing enables
■
rapid deployments
Management via local serial port, Telnet or SNMP
■
Configurable alarm relay contacts for audio/visual fault
■
notification
Supports local and remote fiber and copper loop-back
■
modes
Commercial (0 to 50º C) and wide (-40 to 60º C)
■
operating temperature ranges
Lifetime Warranty and free 24/7 Technical Support
■
iConverter
4xT1/E1 MUX/M
Managed T1/E1 Multiplexer
The iConverter 4xT1/E1 MUX/M multiplexes up to four
T1/E1s and Ethernet onto a fiber optic transport link, and
features remotely managed testing and configuration
capabilities.
The iConverter 4xT1/E1 MUX/M operates in a back-to-back
configuration, with one multiplexer at each end of the fiber
transport link. The 4xT1/E1 MUX/M can be used in applications
where services from legacy TDM equipment require transport
across long distances that exceed the reach or capacity of
copper. This includes applications such as T1/E1 extension,
mobile backhaul and building-to-building PBX connectivity,
making it ideal for Enterprise, Telecom and Utility industries.
The 4xT1/E1 MUX/M supports fixed-fiber and Small Form
Pluggable (SFP) transceivers, enabling easy adaptability to
different fiber types, distances and wavelengths. The 4xT1/
E1 MUX/M supports multimode, single-mode, single-mode
single-fiber, in standard and CWDM wavelengths.
The copper interfaces feature four RJ-48 connectors for
balanced T1/E1 applications. An optional adapter cable is
available to convert each RJ-48 interface to a BNC interface
for unbalanced E1 transport applications.
The 4xT1/E1 MUX/M supports AMI, B8ZS and HDB3 line
codes. DIP-switches provide easy configuration of the T1/E1
line codes and line build-out.
The 4xT1/E1 MUX/M features user-selectable local loop-back
on both the copper and fiber ports, remote fiber loop-back and
circuit test modes. These functions facilitate diagnosis of the
remote unit, and minimizes the need for test equipment and
support personnel at each end of a link. Alarm relay and LEDs
provide fault notification for loss of power, LOS and AIS.
Configuration of T1/E1 line codes, line build out, loopbacks
and circuit test is accomplished via local serial port, Telnet,
SNMP or DIP-switches.
The 4xT1/E1 MUX/M is a compact, managed standalone unit
available in both AC and DC models. The AC model accepts
AC power input ranging from 100VAC to 240VAC, 50/60Hz,
while the DC model accepts 18VDC to 60VDC.
SFP not included
Key Features