Листовка для Ilford Gold Fibre Silk 61.0 cm x 12.0 m 2002000
Модели
2002000
ILFORD GALERIE Prestige Gold Fibre Silk has a baryta (barium sulphate)
coated layer that is traditionally applied to fibre photographic paper base
underneath the silver halide emulsion layers. This baryta layer, which is
beneath the ink receiving layer, offers enhanced definition, extended tonal
range, and excellent archival properties, all of which are important to the
demanding professional digital photographer and printer today. Coated
fibre papers have a unique look and feel, which has become a standard
among art photographers worldwide over the course of more than a
century.
Features
• Traditional Photo fibre base
• Look and feel of traditional baryta photo paper
• High quality black and white and colour images
• Look and feel of traditional baryta photo paper
• High quality black and white and colour images
Printer & inK ComPatibility
For best results the use of good quality pigment inkjet printers and the
corresponding vendor’s inks are recommended. Pigmented inks need time
to “set” before handling and may lead to some loss of gloss in printed
areas.
important note:
Please check that your printer can handle the GALERIE Prestige Gold Fibre
Silk in terms of its specification for caliper (thickness) and also weight.
availability
GALERIE Prestige Gold Fibre Silk paper is available in sheets and rolls.
For detailed information please see the Availability Chart on the GALERIE
section of www.ilford.com.
PhysiCal ProPerties (target values)
Weight 310gsm
Tint (CIE L*a*b*)
97.0, -0.5, 0.2
Caliper
315microns (12.5mil)
CIE Whiteness D65°
100
Opacity >95%
Brightness D65°
96
Gloss (60°)
20%
additional inFormation
Please handle the media with care after printing with pigment inks and
allow 24 hours for the pigment inks to fully cure. The actual drying times
will vary according to the inks used, the ambient conditions during and
after printing and the ink loads. It is recommended to follow the suggested
post printing times outlined by the printer manufacturer for the inks in used.
We do not recommend the use of matt black inks with the GALERIE Prestige
Gold Fibre Silk as these may smudge and do not adhere well to the
surface. Further information on using Prestige Gold Fibre Silk is available
from the product page on www.ilford.com.
note:
Specifications subject to change without notice.
All trademarks are the property of their respective companies.
Prestige
gold Fibre silK
GPGFS13 (sheets) IGGSF13 (rolls) (310gsm)
GPGFS13 • v3.0