Листовка для Transition Networks C3110-1029-A1

Скачать
Страница из 1
The ION Platform
Specifications
Standards 
IEEE Std. 802.3ab, IEEE 802.3z, IEEE 802.3 2000
Data Rate 
1000 Mbps, Layer-1
Switches 
SW1: Remote Fiber Fault Detect 
SW2: Pause (symmetric) 
SW3: Pause (asymmetric) 
SW4: Transparent Link Pass Through (Up=Enabled)   
SW5: Fiber Auto-Negotiation (Down=Enabled) 
 
SW6: Loopback
Hardware/Software 
Hardware: Mode of operation is determined  
Jumpers   
 
by the settings on the 4-position switch  
  
Software: Mode of operation is determined by the most  
 
 
recently saved on-board microprocessor settings 
Status LEDs 
LKF (fiber link): On = Fiber Link, blinking activity 
 
PWR (Power): On = Connection to powered backplane 
TP LED 1 (Copper Link): On = Link, bliking activity   
TP LED2 (Copper Duplex): On = Full Duplex
Dimensions 
Width: 0.86” [22 mm] 
Depth: 6.5” [165 mm] 
Height: 3.4” [86 mm]
Power Consumption 
3.6 Watts, 300mA @ 112 VDC
Environment 
See chassis specifications
Shipping Weight 
1 lb [.45 kg]
Regulatory Compliance  
CISPR/EN55022 Class A, FCC Class A, CE Mark, EN55024
Warranty Lifetime
C3110 Series
C3110 Series
slide-in-module for the ion platform
Features
4
Copper and Fiber Auto-Negotiation  
    
4
AutoCross™ on TP port [
4
Link Pass Through 
4
Remote Fault Detect 
4
Loopback 
4
Pause 
4
Automatic Link Restoration 
4
Field Upgradeable Firmware 
The ION C3110 device provides an interface between 1000Base-T ports 
and 1000Base-SX/LX ports allowing users to integrate fiber optic cabling 
into 1000Base-T copper environments.
4
Report converter status to chassis  
    management software: 
      • Copper and Fiber  
         link/receive status
      • Hardware switch settings
      • Receive error count
4
Write operation includes:
      • Power on/off device
      • Auto-Negotiation enable/disable 
      • Remote Fiber Fault Detect  
         enable/disable
      • Link Pass Through enable/disable 
         
      • Pause enable/disable 
      • Symetric Pause 
      • Asymmetric TX Pause 
      • Asymetric RX Pause 
The following manageable features are avail-
able when used in an ION Platform chassis 
along with an ION Management Module.
Gigabit Ethernet
Can be used in any ION  
 
Platform Chassis
Cost effective fiber deployment 
by pairing C3110 with lower cost 
1000Base-T switches, offering the 
benefits of fiber without the  
 
high costs
Standards based, will link with any 
standard 1000Base-T and any stan-
dard 1000Base-SX or LX ports
see also: 
1000Base-T to 1000Base-SX/LX Stand-Alone Media Converters [pg 150]
1000BASE-T to 1000BASE-SX/LX  
Slide-in-Module 
Ordering Information 
C3110-1013
  1000BASE-T (RJ-45) 
[100 m/328 ft.]
to  1000BASE-SX 850nm MM (SC) 
[220m/721 ft. and 550 m/1804 ft.]  
Link Budget: 8.5 dB
C3110-1024
  1000BASE-T (RJ-45) 
[100 m/328 ft.]
to  1000BASE-SX 1310nm extended MM (SC) 
[2 km/1.2 mi.] Link Budget: 7.0 dB
C3110-1014
  1000BASE-T (RJ-45) 
[100 m/328 ft.]
to  1000BASE-LX 1310nm SM (SC)
[10 km/6.2 mi.] Link Budget: 10.5 dB
C3110-1015
  1000BASE-T (RJ-45) 
[100 m/328 ft.]
to  1000BASE-LX 1310nm SM (SC)
[25 km/15.5 mi.] Link Budget: 15.0 dB
C3110-1017
  1000BASE-T (RJ-45) 
[100 m/328 ft.]
to  1000BASE-LX 1550nm SM (SC)
[65 km/40.4 mi.] Link Budget: 21.0 dB
C3110-1035
  1000BASE-T (RJ-45) 
[100 m/328 ft.]
to  1000BASE-LX 1550nm SM (SC)
[125 km/77.5 mi.] Link Budget: 27.0 dB
C3110-1040
 1000BASE-T (RJ-45) 
[100 m/328 ft.]
to  1000Base-X SFP Slot (empty)
 
Single Fiber Products
 
 
Recommended use in pairs 
C3110-1029-A1
  1000BASE-T (RJ-45) 
[100 m/328 ft.]
to  1000BASE-LX 1310nm TX/1550nm RX  
single fiber single mode (SC)
[20 km/12.4 mi.] Link Budget: 13.0 dB
C3110-1029-A2
  1000BASE-T (RJ-45) 
[100 m/328 ft.]
to  1000BASE-LX 1550nm TX/1310nm RX  
single fiber single mode (SC)
[20 km/12.4 mi.] Link Budget: 13.0 dB
C3110-1029-B1
  1000BASE-T (RJ-45) 
[100 m/328 ft.]
to  1000BASE-LX 1310nm TX/1550nm RX  
single fiber single mode (SC)
[40 km/24.9 mi.] Link Budget: 20.0 dB
C3110-1029-B2
  1000BASE-T (RJ-45) 
[100 m/328 ft.]
to  1000BASE-LX 1550nm TX/1310nm RX  
single fiber single mode (SC)
[40 km/24.9 mi.] Link Budget: 20.0 dB