Листовка для Marantz SR5006

All specifications, dimensions and weights are subject to change without notice. 

D&M Holdings, Marantz, Marantz America, LLC. or any of its subsidiaries will not assume any liability for errors in this spec sheet which may result in consequential errors  

Being made by dealers, designers, custom installers, cabinet makers or end users, etc based upon information contained within this document. 

• Power amplifier 

Rated output: Front: 

100 W + 100 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.) 

Center: 

100 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.) 

Surround: 

100 W + 100 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.) 

Surround back: 

100 W + 100 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.) 

Output connectors: 6 – 8 Ω (SPEAKER A+B: 8 Ω) 

• Analog 

Input sensitivity/Input impedance: 200 mV/47 kΩ 

Frequency response: 10 Hz – 100 kHz — +1, –3 dB 

(DIRECT mode) 

S/N: 100 dB (IHF–A weighted, DIRECT mode) 

• Standard video connectors 

Input/output level and impedance: 1 Vp-p, 75 Ω 

Frequency response: 5 Hz – 10 MHz — 0, –3 dB 

• Color component video connector 

Input/output level and impedance: Y (brightness) signal 

— 1 Vp-p, 75 Ω 

PB / CB signal — 0.7 Vp-p, 75 Ω 

PR / CR signal — 0.7 Vp-p, 75 Ω 

Frequency response: 5 Hz – 60 MHz — 0, –3 dB 

(Note: μV at 75 Ω, 0 dBf = 1 x 10–15 W) 

Receiving Range: 87.5 MHz – 107.9 MHz 520 kHz – 1710 

kHz 

Usable Sensitivity: 1.2 μV (12.8 dBf) 18 μV 

50 dB Quieting Sensitivity: MONO 2.8 μV (20.2 dBf) 

S/N: MONO 70 dB (IHF–A weighted, DIRECT mode) 

STEREO 67 dB (IHF–A weighted, DIRECT mode) 

Total harmonic Distortion (at 1 kHz): MONO 0.7 % 

STEREO 1.0 % 

Power supply: AC 120 V, 60 Hz 

Power consumption: 650 W 

0.2 W (Standby) 

3 W (CEC standby) 

For purposes of improvement, specifications and design are 

subject to change without notice.