Справочник Пользователя для ZyXEL VoIP Router Prestige 2602R-61 91-006-024004
Модели
91-006-024004
Prestige 2602R Series User’s Guide
206
Chapter 18 Media Bandwidth Management Advanced Setup
Figure 99 Media Bandwidth Management: Summary
The following table describes the labels in this screen.
Table 59 Media Bandwidth Management: Summary
LABEL
DESCRIPTION
LAN
WAN
These read-only labels represent the physical interfaces.
Active
Select an interface’s check box to enable bandwidth management on that interface.
Bandwidth management applies to all traffic flowing out of the router through the
Bandwidth management applies to all traffic flowing out of the router through the
interface, regardless of the traffic’s source.
Traffic redirect or IP alias may cause LAN-to-LAN traffic to pass through the Prestige
Traffic redirect or IP alias may cause LAN-to-LAN traffic to pass through the Prestige
and be managed by bandwidth management.
Bandwidth management controls outgoing traffic on an interface, not incoming. In order
Bandwidth management controls outgoing traffic on an interface, not incoming. In order
to limit the download bandwidth of the LAN users, set the bandwidth management class
on the LAN. In order to limit the upload bandwidth, set the bandwidth management class
on the corresponding WAN interface.
Speed (kbps) Enter the amount of bandwidth for this interface that you want to allocate using
bandwidth management.
This appears as the bandwidth budget of the interface’s root class. The recommendation
This appears as the bandwidth budget of the interface’s root class. The recommendation
is to set this speed to match what the interface’s connection can handle. For example,
set the WAN interface speed to 1000 kbps if the ADSL connection has an upstream
speed of 1000 kbps.
Scheduler
Select either Priority-Based or Fairness-Based from the drop-down menu to control
the traffic flow.
Select Priority-Based to give preference to bandwidth classes with higher priorities.
Select Fairness-Based to treat all bandwidth classes equally.
Select Priority-Based to give preference to bandwidth classes with higher priorities.
Select Fairness-Based to treat all bandwidth classes equally.
Max
Bandwidth
Usage
Select this check box to have the Prestige divide up all of the interface’s unallocated
and/or unused bandwidth among the bandwidth classes that require bandwidth. Do not
select this if you want to reserve bandwidth for traffic that does not match a bandwidth
class or you want to limit the speed of this interface (see the Speed field description).
Back
Click Back to go to the main Media Bandwidth Management screen.
Apply
Click Apply to save your settings back to the Prestige.
Cancel
Click Cancel to begin configuring this screen afresh.