Справочник Пользователя для HP A2Y15AV

Скачать
Страница из 342
Processor Configuration Registers
266
Datasheet, Volume 2
2.18.3
ECAP_REG—Extended Capability Register
This Register reports remapping hardware extended capabilities.
B/D/F/Type:
0/0/0/GFXVTBAR
Address Offset:
10–17h
Reset Value:
0000000000F0101Ah
Access:
RO, RO-V
Size:
64 bits
BIOS Optimal Default
00000000000h
Bit
Access
Reset 
Value
RST/
PWR
Description
63:24
RO
0h
Reserved (RSVD) 
23:20
RO
1111b
Uncore
Maximum Handle Mask Value (MHMV) 
The value in this field indicates the maximum supported value for 
the Handle Mask (HM) field in the interrupt entry cache 
invalidation descriptor (iec_inv_dsc).
This field is valid only when the IR field in Extended Capability 
register is reported as set. 
19:18
RO
0h
Reserved (RSVD) 
17:8
RO
010h
Uncore
IOTLB Register Offset (IRO) 
This field specifies the offset to the IOTLB registers relative to the 
register base address of this remapping hardware unit. 
If the register base address is X, and the value reported in this 
field is Y, the address for the first IOTLB invalidation register is 
calculated as X+(16*Y).
7
RO
0b
Uncore
Snoop Control (SC) 
0 = Hardware does not support 1-setting of the SNP field in the 
page-table entries.
1 = Hardware supports the 1-setting of the SNP field in the 
page-table entries. 
6
RO
0b
Uncore
Pass Through (PT) 
0 = Hardware does not support pass-through translation type in 
context entries.
1 = Hardware supports pass-through translation type in context 
entries. 
5
RO
0b
Uncore
Caching Hints (CH) 
0 = Hardware does not support IOTLB caching hints (ALH and 
EH fields in context-entries are treated as reserved(
1 = Hardware supports IOLTB caching hints through the ALH and 
EH fields in context-entries. 
4
RO
0h
Reserved (RSVD) 
3
RO-V
1b
Uncore
Interrupt Remapping Support (IR) 
0 = Hardware does not support interrupt remapping.
1 = Hardware supports interrupt remapping.
Implementations reporting this field as set must also support 
Queued Invalidation (QI)
2
RO
0b
Uncore
Device IOTLB Support (DI) 
0 = Hardware does not support device-IOTLBs.
1 = Hardware supports Device-IOTLBs.
Implementations reporting this field as set must also support 
Queued Invalidation (QI)
1
RO-V
1b
Uncore
Queued Invalidation Support (QI) 
0 = Hardware does not support queued invalidations.
1 = Hardware supports queued invalidations.