Справочник Пользователя для HP A2Y15AV

98

Datasheet, Volume 2

This register controls the processor to PCI Express-G non-prefetchable memory access 
routing based on the following formula:

MEMORY_BASE ≤ address ≤ MEMORY_LIMIT 

The upper 12 bits of the register are read/write and correspond to the upper 
12 address bits A[31:20] of the 32 bit address. The bottom 4 bits of this register are 
read-only and return zeroes when read. This register must be initialized by the 
configuration software. For the purpose of address decode, address bits A[19:0] are 
assumed to be FFFFFh. Thus, the top of the defined memory address range will be at 
the top of a 1 MB aligned memory block. 

Memory range covered by MBASE and MLIMIT registers are used to map non-

prefetchable PCI Express-G address ranges (typically where control/status memory-

mapped I/O data structures of the graphics controller will reside) and PMBASE and 

PMLIMIT are used to map prefetchable address ranges (typically graphics local 

memory). This segregation allows application of USWC space attribute to be performed 

in a true plug-and-play manner to the prefetchable address range for improved 

processor-PCI Express memory access performance.

Configuration software is responsible for programming all address range registers 

(prefetchable, non-prefetchable) with the values that provide exclusive address ranges; 

that is, prevent overlap with each other and/or with the ranges covered with the main 

memory. There is no provision in the processor hardware to enforce prevention of 

overlap and operations of the system in the case of overlap are not ensured.

15:4

RW

000h

Uncore

Memory Address Limit (MLIMIT)
This field corresponds to A[31:20] of the upper limit of the 

address range passed to PCI Express-G. 

3:0

RO

0h