Справочник Пользователя для Toshiba RD-XS34SU

Introduction

Connections

Basic Setup

Setting up the remote control

While pressing EASY NAVI, press 2.

The remote control mode is set to “DR 2”.

Select the same mode that you have set to the recorder.

Notes
• If the recorder’s mode and the remote control’s mode are different, the recorder’s mode (DR 1, DR 2 or DR 3) appears on the

display of the front panel.

• When the batteries of the remote control are replaced or when the time indicator of the front panel flashes, check the remote

control modes of both the recorder and the remote control, and re-program it if necessary.

Disabling the remote control for a temporary period

You can temporarily disable the reception of the remote control signals at the recorder, when the selection of DR 1,
DR 2 and DR 3 is not sufficient while you are using several Toshiba HDD/DVD video recorders.
Press CH buttons on the recorder at the same time for three seconds or more.
The recorder display shows “DR - OFF”, indicating that the remote control is disabled.
To enable the remote control, perform the same step again. (The display shows “DR-1 , DR-2 or DR-3” depending on
your setting.)

Notes
• This function is not available in Standby mode.
• You cannot use this feature when the power is turned off, if you have turned “Off” “Front Display” on the menu.

When using with DR 1

mode

When using with DR 2

mode

When using with DR 3

mode

EASY

NAVI

D R 1

D R 2
D R 3

D R 1

EASY
NAVI

D R 2

D R 3

D R 1

D R 2

D R 3

Remote control

Recorder

Mode setting