Справочник Пользователя для Toshiba W-705
2 6
Watching a TV program while
recording another
recording another
1) While recording, press
TV/VCR to turn off
“VCR” indicator.
2) Choose another channel using the channel
selector on the TV.
Skipping unnecessary scenes while
recording
recording
Press
PAUSE/STILL to stop recording
momentarily. To resume recording, press
PAUSE/STILL again.
PAUSE/STILL again.
Note
The VCR automatically shifts to the stop mode if the
recording pause mode continues for 10 minutes.
The VCR automatically shifts to the stop mode if the
recording pause mode continues for 10 minutes.
Basic Recording
1
Load a cassette with the safety tab attached.
2
Press
TV/VCR so that the “VCR”
indicator appears in the VCR display.
3
Select a channel to record with
CHANNEL on the VCR, or CH or
number buttons on the remote
control.
CHANNEL on the VCR, or CH or
number buttons on the remote
control.
If you see “L1” or “L2” in the VCR display, press
INPUT SELECT so
that the channel number appears.
• If you record cable channels via the cable box, make the output
• If you record cable channels via the cable box, make the output
channel number of the cable box or “L1” appear, depending on your
connection. (See pages 11 – 13.)
connection. (See pages 11 – 13.)
4
Press
SP/SLP to select the
recording tape speed.
SP: Suitable for general recording with
better picture and sound quality.
SLP: Suitable for tripling recording time, but with less picture and
sound quality than using the SP tape speed.
better picture and sound quality.
SLP: Suitable for tripling recording time, but with less picture and
sound quality than using the SP tape speed.
5
Press
REC on the VCR, or
simultaneously press both
REC on
the remote control.
Recording starts.
6
Press
STOP to stop recording.
Recording off time setting
By setting the recording off time, the recording
stops and the VCR is turned off automatically.
While recording, press
stops and the VCR is turned off automatically.
While recording, press
REC on the VCR
repeatedly to set the desired off time.
Each time you press
Each time you press
REC, each half-hour up to
about 4 hours later and “- : - -” appear cyclically.
Notes
• To cancel the recording in progress, press
• To cancel the recording in progress, press
STOP.
• If the VCR clock is not set, this function will not
activate.
VCR
SLP
CH
POWER
VCR
SLP
POWER
VCR
SLP
CH
POWER
VCR
SLP
REC
CH
POWER
VCR
SLP
REC
CH
PM
OFF
POWER
RECORDING
Recording a TV Program
This section explains the basic recording operation.
Preparation
Select the video channel (3 or 4) or video input mode on the TV.
Select the video channel (3 or 4) or video input mode on the TV.
To record from other
connected equipment
In step
connected equipment
In step
3
, press
INPUT
SELECT to switch the display
as follows:
LI: To record via the LINE IN
1 jacks on the rear panel.
L2: To record via the LINE IN
2 jacks on the front panel.
as follows:
LI: To record via the LINE IN
1 jacks on the rear panel.
L2: To record via the LINE IN
2 jacks on the front panel.
TV/VCR
1
2
3
4
5
6
7
8
9
0
a
+
–
8
9
J
PROG
+
–
RE
V
FW
D
(
)
-
L
3
2
4
5
INPUT
SELECT
SELECT
6
•
REC
TIMER
REC