Справочник Пользователя для Toshiba SD-V390-S-TU

You can ONLY listen to DVD playback using COAXIAL
(X), OPTICAL (O) and AUDIO OUT (A2) connections.
The tuner and VCR will still be heard through the
RF.OUT (R) or DVD/VHS AUDIO OUT (A1) jack. (See
page 12.)

Connect the Left and Right AUDIO OUT (or DVD/VHS
AUDIO OUT) jacks on the DVD+VCR to the audio left
and right in jacks on your amplifier, receiver, or stereo
system using the audio cables (A1, A2) supplied.

1

Connect one of the DVD+VCR’s DIGITAL AUDIO
OUT jacks (OPTICAL O or COAXIAL X) to the cor-
responding in jack on your amplifier. Use an option-
al digital (optical O or coaxial X) audio cable.

2

You will need to activate the DVD+VCR’s digital
output. (See Digital Audio Output on page 20).

A digital multi-channel connection provides the best
sound quality. For this you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats supported by your DVD+VCR (MPEG 2,
Dolby Digital and DTS). Check the receiver manual and
the logos on the front of the receiver.

Due to the DTS Licensing agreement, the digital output
will be in DTS digital out when DTS audio stream is
selected.

– If the audio format of the digital output does not match

the capabilities of your receiver, the receiver will 
produce a strong, distorted sound or no sound at all. 

– Six Channel Digital Surround Sound via digital con-

nection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder. 

– To see the audio format of the current DVD in the on-

screen display, press AUDIO.

Connect the VHS IN 1 or AV INPUT jacks on the
DVD+VCR to the audio/video out jacks on your 
accessory component, using the optional audio/video
cables.

Accessory Component:

VCR, Camcorder, 

Video Camera,

Satellite Receiver,

Laser Disc Player