Справочник Пользователя для Toshiba RBC-AMS41E

GRUPAd.o.o.

12

Example of program input
For program 01 for Wednesday, “7:00”, “ON”, “heating”, 
“25°C”, “restriction on key operation enabled”, “save 
operation” and “mode 1” will be set.

• Initial screen (clock setting/operation stop)

• Push the 

 button (46), and transfer the 

display to the input screen.

• On the input screen, the entire display blinks.

• Push the 

 button (45), and move the day 

arrow 

 to the position above “WE”.

• Push the 

 button (42), and enter the day of 

the week.

• The days of the week display and the day 

arrow 

 stop blinking and light up.

• Repeatedly push the 

 button (37), and 

display the number of the program which is to 
contain the settings on the numeric display.

• Push the 

 button (42), and enter the 

program number.

• The numeric display stops blinking and lights 

up.

• Push the TIME 

 and 

 buttons (40), and 

set the operation time.

• If the buttons are held down for four or more 

seconds, the time can be moved forward or 
back in 10-minute increments.

I. Selecting and setting operation/stop

Push the 

 button (48) until 

 blinks 

on the display.

II. Selecting and setting the operation mode

Push the 

 button (34) until 

 blinks 

on the display.

III. Setting the temperature

Push the TEMP 

 and 

 buttons (49) 

until “25” blinks on the numeric display.

IV. Setting the restriction on the button 

operations
Push the 

 button (34) while holding 

down the 

 button (43) until 

 blinks on 

the display.

V. Setting the save operation

Push the 

 button (38) until 

 blinks 

on the display.

• Push the 

 button (42) to enter the operation 

settings.

• With the exception of 

, all the displays 

stop blinking and light up.

• Finally, when the 

 button (46) is pushed, 

 goes off, and the original screen is 

restored.

• An underbar is displayed under the selected day 

of the week.

MB FRIGO Grupa d.o.o., Bani 81, 10010 Zagreb, www.toshiba.hr, e-mail: toshiba@mbfrigo.hr