Справочник Пользователя для TP-LINK TL-WN951-N

 

 

30

wireless adapter. While in ad hoc mode, it is recommended that you select WEP to secure 

your wireless network. 

)

In Infrastructure mode, you will see Figure 4-3 if you selected the security type WEP; you 
will see Figure 4-4 if you selected the security type WPA-PSK/WPA2-PSK. While, if you 
selected the security type WPA/WPA2  (-Enterprise),  Figure 4-5 or Figure 4-6 will be 
displayed. 

In ad hoc mode, you will see Figure 4-2 if you selected the security type WEP. 

¾

 

Encryption Type: From the drop-down menu, select the encryption type that is the same 

as on your router or access point. 

¾

 

Key Index: You can select ASCII or Hexadecimal format on the right. ASCII format stands 

for any combination of keyboard characters in the specified length. Hexadecimal format 

stands for any combination of hexadecimal digits (0-9, a-f, A-F) in the specified length. 

• 

For 64-bit encryption - You can enter 10 hexadecimal digits (any combination of 0-9, 

a-f, A-F, zero key is not permitted) or 5 ASCII characters.   

• 

For 128-bit encryption - You can enter 26 hexadecimal digits (any combination of 0-9, 

a-f, A-F, zero key is not permitted) or 13 ASCII characters. 

¾

 

Security Key: Enter the passphrase exactly as it is on your wireless router or access point. 

Click the Show characters box to see the passphrase. Unchecking it will hide it.   

¾

 

Authentication: Select a type of authentication, either certificate or password. 

)

In the security type of WPA/WPA2  (-Enterprise), you will see Figure 4-5 if you choose 
certificate as the authentication, you will see Figure 4-6 if you choose password as the 
authentication. 

¾

 

Certificate: If you select certificate as your Authentication, then you need to specify your 

certificate from the drop-down list here. 

¾

 

User Name: Enter the name of the enterprise network. 

¾

 

Password: Enter the password for the enterprise network. Click the Show characters box 

to see the passphrase. Unchecking it will hide it. 

¾

 

Start this connection automatically: check this box to automatically connect to this 

network next time.   

¾

 

Save: Click Save to save your settings.   

Having completed the above settings, the Profile page should look like the following figure. To 

connect to a desired network, just highlight the network you would like to connect to and click 

the Connect button on the bottom of the window. Then click OK in Figure 4-8 to activate the 

profile.