Справочник Пользователя для TP-LINK TL-SG2008

 

21 

default the switch has a certificate (self-signed certificate) and a corresponding private key. The 
Certificate/Key Download function enables the user to replace the default key pair. 

After SSL is effective, you can log on to the Web management page via 

https://192.168.0.1

. For 

the first time you use HTTPS connection to log into the switch with the default certificate, you will 
be prompted that “The security certificate presented by this website was not issued by a trusted 
certificate authority” or “Certificate Errors”. Please add this certificate to trusted certificates or 
continue to this website. 

On this page you can configure the SSL function. 

Choose the menu System→Access Security→SSL Config to load the following page. 

 

Figure 4-16 SSL Config 

The following entries are displayed on this screen: 

¾

Select Enable/Disable the SSL function on the switch. 

¾

Select the desired certificate to download to the switch. The 
certificate must be BASE64 encoded. 

¾

Select the desired SSL key to download to the switch. The key 
must be BASE64 encoded. 

1.  The SSL certificate and key downloaded must match each other; otherwise the HTTPS 

connection will not work. 

2.  The SSL certificate and key downloaded will not take effect until the switch is rebooted. 

3.  To establish a secured connection using https, please enter https:// into the URL field of the 

browser.