Справочник Пользователя для TP-LINK TL-SG2008
33
¾
Port Isolation Config
Port:
Select the port number to set its forwardlist.
Forward Portlist:
Select the port that to be forwarded to.
¾
Port Isolation List
Port:
Display the port number.
Forward Portlist:
Display the forwardlist.
5.1.5 Loopback Detection
With loopback detection feature enabled, the switch can detect loops using loopback detection
packets. When a loop is detected, the switch will display an alert or further block the corresponding
port according to the port configuration.
packets. When a loop is detected, the switch will display an alert or further block the corresponding
port according to the port configuration.
Choose the menu Switching→Port→LoopbackDetection to load the following page.
Figure 5-6 Loopback Detection Config
The following entries are displayed on this screen:
¾
Global Config
LoopbackDetection
Status:
Status:
Here you can enable or disable Loopback Detection function
globally.
globally.
Detection Interval:
Set a Loopback Detection interval between 1 and 1000 seconds.
By default, it’s 30 seconds.
By default, it’s 30 seconds.