Справочник Пользователя для Trimble Outdoors SPSX51

SPSx51 Modular GPS Receivers User Guide     

Configuring the Receiver Using the Keypad and Display     

The Home screen is the main screen displayed on the receiver. If the receiver is 
displaying another screen and is left idle for 60 seconds, you are returned to the Home 
screen. It shows the following information:

Number of satellites being tracked:

–

When the receiver is in Base mode, the Home screen displays the number 
of satellites in view, that is, all satellites above the elevation mask. This is 
the number of satellites that the base station is sending data for.

–

When the receiver is in Rover, Heading, or Moving Base mode, the Home 
screen displays the number of satellites used to calculate the position.

–

If the receiver is set to use SBAS or OmniSTAR corrections, the Home 
screen displays the number of satellites that corrections have been received 
for. 

–

If the receiver is computing an autonomous solution, the Home screen 
displays all satellites in view, that is, all satellites above the elevation mask.

B

Tip – You can also view these details using the Web browser (select Receiver Status / 
Position).

Internal battery power remaining

Current mode configuration

Internal radio activity

Internal radio channel or network

The receiver has several view-only status screens that allow you to review the current 
settings of the receiver. The status screens provide the following information:

Position solution and precisions

CMR and RTCM IDs

Base name and code

Latitude, longitude, and height

Antenna height

Horizontal and vertical precision

Receiver firmware version

Receiver serial number

Receiver IP address

To access these screens from the Home screen, press 

J

     or 

K

    .