Справочник Пользователя для Brother Sewing Machine

KNOWING YOUR SEWING MACHINE  —————————————————————————————————————————

5

a Needle position selector (page 22)

Shift this lever to select needle position.

b Stitch width knob (page 22)

Turn this knob to set the stitch width.

c Thread take-up lever (page 13)
d Flat bed attachment with accessory storage (page 6 and 26)
e Upper tension control dial (page 24)

This controls the tension of the upper thread.

f Stitch length knob (page 22)

Turn this knob to set the stitch length.

g Reverse sewing lever (page 23)

Press and hold down the reverse sewing lever to sew in 
the opposite direction.

h Built-in handle
i Spool pin (page 10 and 13)

The spool pin holds the spool of thread.

j Bobbin winder (page 10)

The bobbin winder winds thread onto the bobbin for 
use as the lower thread.

k Handwheel

Use the handwheel to manually raise and lower the needle.

l Main power/sewing light switch (page 8)

Use this switch to turn on and off the main power and 
sewing light.

m Foot controller jack

Insert the foot controller plug into the foot controller 
jack, which also supplies power to this machine.

n Thread cutter (page 23)

Pass the threads through the thread cutter to cut them.

o Presser foot lever (page 13)

Use the presser foot lever to raise and lower the presser foot.

p Bobbin winding pre-tension disc/thread guide (page 10 

and 13)
The thread guide/bobbin winding pre-tension disc is 
used when winding the thread onto the bobbin and 
threading the machine.

q Foot controller (page 9)

Use the foot controller to control the sewing speed and 
to start and stop sewing.
Foot Controller: 
Model KD-1902 for 110-120V area

KD-1902 for 110-127V area (Brazil only)

Model KD-2902 for 220-240V area

The foot controller part code differs depending on the 
country or region. Contact your dealer or the nearest 
authorized service center.