Справочник Пользователя для Acer S5301WB
42
4
(1) Disassemble the screw*6(Hex
#4-40*L6), then take off the
R/C.(Figure1).
#4-40*L6), then take off the
R/C.(Figure1).
(2) Disassemble the screw*5
(M3*L6) and loos the wires
connecting the engine and the
MB.
(M3*L6) and loos the wires
connecting the engine and the
MB.
(3) Take off the SHD of the main
board.(Figure2)
board.(Figure2)
screw
driver
driver
5
(1) Extract all the wires in the
mainboard and loose the wire in
clips.(Figure1/2)
mainboard and loose the wire in
clips.(Figure1/2)
(2) Take off the ourlet case and
the Fans*2.
the Fans*2.
(3) Take off the main board.
Attention: DON'T TWIST THE
PIN UNDER THE M/B.
Attention: DON'T TWIST THE
PIN UNDER THE M/B.
screw
driver
driver
1
2
3 4
5
6
Figure1
3
4
5
2
1
Figure2
loose these wires
CW
3pin
3pin
blower wire
twins fan wire
outlet speaker wire
CW wire
ballast
5pin wire
5pin wire
speaker
wire
wire
IR wire
inlet fan
wire
wire
Figure1
Figure2
Note: Circuit boards > 10cm
2
has been highlighted with the yellow
rectangle as above image shows. Please detach the Circuit boards
and follow local regulations for disposal.
and follow local regulations for disposal.
6
(1) Dismantle the screws*2
(M3*L6) to loose the EXTENSION
BD.(Figure1)
(2) Dismantle the STAND
OFF(M3 D6*9L) and screws*2
(M3*L6) on M/B.(Figure2,3)
(M3*L6) to loose the EXTENSION
BD.(Figure1)
(2) Dismantle the STAND
OFF(M3 D6*9L) and screws*2
(M3*L6) on M/B.(Figure2,3)
screw
driver
driver
Note: Circuit boards > 10cm
2
has been highlighted with the yellow
rectangle as above image shows. Please detach the Circuit boards
and follow local regulations for disposal.
and follow local regulations for disposal.
EXTENSION BD
Figure1
Figure2
Figure3