Справочник Пользователя для Siemens gigaset 200

© Siemens AG 2003, D:\Auftrag\Mobilephone

s\C75 Aries\mx_us-en\LA\Aries_Startup.fm

Template:

 X75, 140x105, Version 2.2; 

VAR Languag

e: am; VAR issue date: 050718

 of C75 Aries, w/o ptt, FUG, 143 mm, mx_us-en, A31008-H6970-A40-1-4A19 

The battery is not fully charged 

when delivered. Plug charger cable 

into the bottom of the phone, plug 

power supply unit into a wall outlet 

and charge for at least two hours. 
As an alternative, the battery can be 

charged via the USB port (see Acces-

sories, page 127). 

Y

Display during charging.

A discharged battery is fully charged 

after about 2 hours. Charging is only 

possible within a temperature range 

of +5 °C to 45 °C (41 °F to 113 °F). If 

the temperature rises/falls 5 °C (9 °F) 

above/below this range, the charge 

symbol flashes a warning. The line 

voltage specified on the power sup-

ply unit must not be exceeded. 

The operating time depends on the 

conditions of use. Extreme tempera-

tures considerably reduce the 

phone’s standby time. Avoid leaving 

the phone in the sun or on a heater.

Call time: 100 to 330 minutes

Standby time: 60 to 300 hours

If the battery is fully discharged, the 

charge icon is not immediately visi-

ble when the power supply is 

plugged in. It will appear after up to 

two hours. In this case, the battery is 

fully charged after 3 to 4 hours.
Only use the plug-in power supply 

Charge level display during opera-

tion (empty–full):

V

 

W

 

X

 

A beep sounds when the battery is 

nearly flat. The charge level of the 

battery is only displayed correctly af-

ter an uninterrupted charging/dis-

charging cycle. You should therefore 

 

and where possible not finish the 

. 

Additional information
The power supply unit heats up when used 

for long periods. This is normal and not 

dangerous.
If the battery is removed for longer than 

30 seconds, the clock must be reset.