Справочник Пользователя для Meco Bonza Series

STEP 12-ATTACH LP CYLINDER TO GRILL - (ALL MODELS)

•Obtain a filled LP Cylinder at your local LP gas supplier or exchange center.

•Set bottom ring of LP Cylinder into Cylinder Bracket through round hole in Bottom Shelf (Fig.

H). Turn Adjusting Knob clockwise to secure LP Cylinder inside Cylinder Bracket(Fig. H).

•Turn all control knobs and LP Cylinder valve to the “Off” position.

•Take the protective cap off the cylinder valve. (Fig. I) Hold Regulator in a straight line with LP

Cylinder valve so the connection does not cross thread. Insert nipple into the cylinder valve. Hand

tighten coupling nut in clockwise direction. Do not use tools.

•Make sure Regulator hose does not contact hot metal surfaces.

WARNING: Do not use grill if this connection can not be completed. Be sure to

test this connection for gas leaks before operation of Gas Grill.

PROTECTIVE CAP

LP GAS

VALVE

REGULATOR

ROUTE HOSE UNDER

BRACE ON MODELS

WITH WOODEN LEGS

CYLINDER

FIG. H

FIG. I

ADJUSTING

KNOB

ROUTE HOSE ON

OUTSIDE OF LEG ON

ALL MODELS

TURN REGULATOR COUPLING

NUT CLOCKWISE TO TIGHTEN