Справочник Пользователя для Intel G2120 CM8063701095801
Модели
CM8063701095801
Interfaces
32
Datasheet, Volume 1
2.4.2.1.3
Cursors A and B
Cursors A and B are small, fixed-sized planes dedicated for mouse cursor acceleration,
and are associated with Planes A and B respectively. These planes support resolutions
up to 256 x 256 each.
and are associated with Planes A and B respectively. These planes support resolutions
up to 256 x 256 each.
2.4.2.1.4
VGA
VGA is used for boot, safe mode, legacy games, and so forth This mode can be changed
by an application without OS/driver notification, due to legacy requirements.
by an application without OS/driver notification, due to legacy requirements.
2.4.2.2
Display Pipes
The display pipe blends and synchronizes pixel data received from one or more display
planes and adds the timing of the display output device upon which the image is
displayed. This is clocked by the Display Reference clock inputs.
planes and adds the timing of the display output device upon which the image is
displayed. This is clocked by the Display Reference clock inputs.
The display pipes A and B operate independently of each other at the rate of 1 pixel per
clock. They can attach to any of the display ports. Each pipe sends display data to the
PCH over the Intel Flexible Display Interface (Intel FDI).
clock. They can attach to any of the display ports. Each pipe sends display data to the
PCH over the Intel Flexible Display Interface (Intel FDI).
2.4.2.3
Display Ports
The display ports consist of output logic and pins that transmit the display data to the
associated encoding logic and send the data to the display device (that is, LVDS, HDMI,
DVI, SDVO, and so forth). All display interfaces connecting external displays are now
repartitioned and driven from the PCH.
associated encoding logic and send the data to the display device (that is, LVDS, HDMI,
DVI, SDVO, and so forth). All display interfaces connecting external displays are now
repartitioned and driven from the PCH.
2.4.3
Intel
®
Flexible Display Interface
The Intel Flexible Display Interface (Intel FDI) is a proprietary link for carrying display
traffic from the integrated graphics to the PCH display I/Os. Intel FDI supports two
independent channels—one for pipe A and one for pipe B.
traffic from the integrated graphics to the PCH display I/Os. Intel FDI supports two
independent channels—one for pipe A and one for pipe B.
• Each channel has four transmit (Tx) differential pairs used for transporting pixel
and framing data from the display engine.
• Each channel has one single-ended LineSync and one FrameSync input (1-V CMOS
signaling).
• One display interrupt line input (1-V CMOS signaling).
• Intel FDI may dynamically scalable down to 2X or 1X based on actual display
• Intel FDI may dynamically scalable down to 2X or 1X based on actual display
bandwidth requirements.
• Common 100-MHz reference clock is sent to both processor and PCH.
• Each channel transports at a rate of 2.7 Gbps.
• Intel 5 series Chipset supports end-to-end lane reversal across both channels (no
• Each channel transports at a rate of 2.7 Gbps.
• Intel 5 series Chipset supports end-to-end lane reversal across both channels (no
reversal support required in the processor).