Листовка для Transition Networks S4TEF1029-122-NA

Ordering Information 

 

1300nm multimode (ST) 

to 

(4) RJ-48 

 

1300nm multimode (SC) 

to 

(4) RJ-48 

 

1310nm single mode (SC)

to 

(4) RJ-48 

 

1310nm single mode (SC)

to 

(4) RJ-48 

*

 

1310nm single mode (SC)

to 

(4) RJ-48 

*

 

1550nm single mode (SC)

to 

(4) RJ-48 

*

 

1550nm single mode (SC) 

to 

(4) RJ-48 

 

1 SFP port (Empty) 

to 

(4) RJ-48 

 

2 SFP ports (Empty) 

to 

(4) RJ-48 

Recommended use in pairs 

*

 

1310nm TX/1550nm RX single fiber  

single mode (SC)

to 

(4) RJ-48 

*

 

1550nm TX/1310nm RX single fiber  

single mode (SC)

to 

(4) RJ-48 

*

 

1310nm TX/1550nm RX single fiber  

single mode (SC)

to 

(4) RJ-48 

*

 

1550nm TX/1310nm RX single fiber  

single mode (SC)

to 

(4) RJ-48 

Specifications

Standards 

  Ethernet 

interface: 

   IEEE 

802.3™-2008 

 

   TDM 

interfaces: 

 

 

 

ANSI T1.102, T1.403 and T1.408 

 

 

 

ITU I.431, G.703,G.736, G.775 and G.823 

 

 

 

ETSI 300-166, 300-233 and TBR 12/13 

   AT&T 

Pub 

62411

Switches 

 

 

Numerous switch settings for line coding, line buildout,  

 

 

 

loopback (per port), AIS setting

Dimensions  

 

Width: 3.7” [94 mm] 

   

Depth: 4.7” [119 mm] 

   

Height: 1.8” [46 mm]

Power 

 

 

External AC/DC provided; 12 VDC, 1.25A; unregulated;  

   standard; 

UL 

Listed

Power Consumption 

 

4.4 Watts

Operating Temperature 

 

-40°C – 70°C (not including power supply)

Storage Temperature 

 

-40°C – 85°C

Altitude 

 

 

0 – 10,000 ft.

Operating Humidity 

 

5% – 95% (non-condensing) 

Shipping Weight 

 

2 lbs. [0.90 kg]

Regulatory Compliance 

 

EN55022 Class A, EN55024, CE mark

Warranty 

  Lifetime

4

Low cost transport capability: (4) T1/E1/J1

4

Target applications of the device include: FTTx, such as Fiber-to-the-Busi   

    ness, Fiber-to-the-Building, Fiber-to-the-MDU and Fiber-to-the-Home;  
    Cell Tower Backhaul

4

Automatic Link Restoration 

4

Remote Management 

The product provides physical layer status monitoring and alarm classification func-
tions for Telecom operators to manage their fiber optic network and reduce operation 
and maintenance costs.
Copper connections are compatible with G.703 and AMI/B8ZS/HDB3; while the optical 
connection will run at 155 Mbps. A hardware-based solution guarantees the constant 
bit rate of TDM transport without requiring traffic management.

Application

Features

4

Loopback 

4

Local and Remote Loopback 

4

AIS/TAOS

4

LEDs for each data port

4

Settings for line code, line length,  

    local loopback or remote loopback 

4

T1/E1/J1 mode settings

4

Local (AUX) Management Interface

4

Access to complete status information  

    on local and remote device

4

Field Upgradeable Firmware  

4

Extended Operating Temperature 

see also: 

4x T1 Transport Mux Point System™ Slide-In-Module NID 

Devices must be used in pairs. Typically 
installation will include a chassis card 
[C4TEF, pg 60] installed in the Point 
System™  locally and a stand-alone de-
vice installed at the remote location.

Optional Accessories (sold separately)

    Stand-Alone Power Supply 

    DIN Rail Bracket 5.0” [127 mm]

    DIN Rail Bracket (flat) 3.3” [84 mm]

    Wall Mount Bracket 4.0” [102 mm]

    Vertical Wall Mount Bracket 5.0” [127 mm]

*Note: Operating Temperature -20°C – 70°C 

only on these models.