Справочник Пользователя для Philips CD Soundmachine AZ202C AZ202C/05

o

  Apparatus shall not be exposed to dripping or splashing. 

p

  Do not place any sources of danger on the apparatus (e.g. 

liquid filled objects, lighted candles). 

Important notes for users in the U.K.

How to connect a plug

The wires in the mains lead are coloured with the following code: 

blue = neutral (N), brown = live (L).

As these colours may not correspond with the colour markings 

identifying the terminals in your plug, proceed as follows:

Connect the blue wire to the terminal marked N or 

•

coloured black. 

Connect the brown wire to the terminal marked L or 

•

coloured red.

Do not connect either wire to the earth terminal in the plug, 

•

marked E (or e) or coloured green (or green and yellow).

Before replacing the plug cover, make certain that the cord 

grip is clamped over the sheath of the lead - not simply over 

the two wires.

Mains plug

This apparatus is fitted with an approved 13 Amp plug. To change

a fuse in this type of plug proceed as follows:
a

  Remove fuse cover and fuse.

b

  Fix new fuse which should be a BS1362 3 Amp, A.S.T.A. or 

BSI approved type.

c

  Refit the fuse cover.

If the fitted plug is not suitable for your socket outlets, it should be

cut off and an appropriate plug fitted in its place.

If the mains plug contains a fuse, this should have a value of 3 Amp.

If a plug without a fuse is used, the fuse at the distribution board 

should not be greater than 3 Amp.