Справочник Пользователя для ZyXEL 336M 91-003-192BUN2
Модели
91-003-192BUN2
ZyXEL P-336M User’s Guide
Chapter 5 Tools
68
5.1.4 Configuration Backup
Note: Do not turn off the P-336M while the file transfer process is taking place.
Follow the steps below to back up the current configuration of the P-336M.
1 In the web configurator, click Tools > Admin (see
).
2 Scroll to the bottom of the ADMIN screen and click Save Configuration.
3 A File Download screen displays. Click Save.
Gateway Name
Enter a descriptive name (up to 32 characters) for your P-336M. This is for
identification purposes only.
Enable Remote
Management
Remote management allows you to allow access to the P-336M web configurator
from the WAN.
Select this option to activate this feature.
Clear this check box to disable this feature.
Select this option to activate this feature.
Clear this check box to disable this feature.
Remote Admin
Port
Specify the port number of the embedded web server on the P-336M for accessing
the web configurator.
Enter a port number to access the web configurator. If you enter a number other
Enter a port number to access the web configurator. If you enter a number other
than 80, you need to append the port number to the WAN port IP address to
access the web configurator. For example, if you enter “8080” as the web server
port number, then you must enter “http://10.10.1.1:8080” where 10.10.1.1 is the
WAN port IP address.
Remote Admin
Inbound Filter
Select a filter action on the traffic. Select You can configure filter actions in the
Inbound Filter screen.
Admin Idle
Timeout
Specify how many minutes the web configuration can be left idle before the
session times out. After it times out you have to log in with your username and
password again. Very long idle timeouts may have security risks.
UPNP
Enable UPNP
Select this option to activate this feature.
Save and Restore
Configuration
Restore
Configuration
From File
You can restore a previously save configuration file to the P-336M.
Enter the name of the configuration file or click Browse to locate it and click
Enter the name of the configuration file or click Browse to locate it and click
Restore Configuration From File to start the file upload process.
Save
Configuration
Click Save Configuration to save the current device configuration to your
computer.
Cancel Click
Cancel to start configuring this screen again.
Table 28 Tools: Admin
LABEL
DESCRIPTION