Справочник Пользователя для Transition Networks CFETF1016-205

CFETF10xx-2xx

p o i n t s y s t e m ™

s l i d e - i n - m o d u l e

m e d i a c o n v e r t e r

Transition Networks, Inc.
6475 City West Parkway
Minneapolis, MN 55344 USA

tel 952.941.7600
or 800.526.9267
fax 952.941.2322
info@transition.com
http://www.transition.com

©2007 Transition Networks, Inc.
All trademarks are the property of their respective owners.
Technical information is subject to change without notice.

Specifications

See next page for complete fiber optic connector specs.

Standards

IEEE Std. 802.3™

Switches

SW1: Auto-Negotiation (UP = ON)
SW2: Pause (UP = ON)
SW3: Link Pass Through (UP = ON)
SW4: Far End Fault (UP = ON)

Internal Jumpers

AutoCross™ Jumper: Enable/disable AutoCross™

Hardware/Software Jumper: Hardware: Converter mode is determined by 4-position

switch settings

Software: Converter mode is determined by most recently
saved on-board microprocessor settings.

Status LEDs

PWR (Power): On = connection to external power
LKF (Fiber Link): On = Fiber Link
RXF (Fiber Receive): Blinking = data reception on
fiber link
RXC (Copper Receive): Blinking = data reception on
copper link
LKC (Copper Link): On = Copper Link

Dimensions

Width: 0.86" [22 mm]
Depth: 5.0" [127 mm]
Height: 3.4" [86 mm]

Power Consumption

3.4 watts

Environment

See chassis specifications

Shipping Weight

1 lb. [0.45 kg]

Regulatory Compliance

CISPR/EN55022 Class A & B; FCC Class A & B; CE Mark

Warranty

Lifetime

Fast Ethernet

100BASE-TX to 100BASE-FX

[Class B]

Fast Ethernet Class B Media Converter

Integrate fiber into copper

based environments that require
Class B rated products.

Can be used with any Point

System™ Chassis (

see pgs. 20 & 21)

Should be used in the 18-slot Class

B Point System™ Chassis if Class B
ratings are required.

Features

—far below the Class II rating of 92 bit times.

see next pages

The following converter management features are available
in conjunction with the Point System™:

Reporting Features

Report converter status to management software:

• TP & Fiber Link status
• Hardware switch settings
• Fault
• TP cable length

Write operation includes:

• Power on/off device
• Full or half-duplex
• Pause enable/disable
• LPT enable/disable
• FEF enable/disable
• AutoCross™ enable/disable

Round trip delay of only 40 bit times

Far End Fault (FEF) Detection

AutoCross™

Auto-Negotiation

Link Pass Through

Automatic Link Restoration

Pause

Remote Firmware Upgrade

CFETF1011-205

100BASE-TX (RJ-45)

[100 m/328 ft.]

to 100BASE-FX 1300nm multimode (ST)

[2 km/1.2 mi.] Link Budget: 11.0 dB

CFETF1013-205

100BASE-TX (RJ-45)

[100 m/328 ft.]

to 100BASE-FX 1300nm multimode (SC)

[2 km/1.2 mi.] Link Budget: 11.0 dB

CFETF1039-205

100BASE-TX (RJ-45)

[100 m/328 ft.]

to 100BASE-FX 1300nm multimode (LC)

[2 km/1.2 mi.] Link Budget: 11.0 dB

CFETF1018-205

100BASE-TX (RJ-45)

[100 m/328 ft.]

to 100BASE-FX 1300nm MM (MT-RJ)

[2 km/1.2 mi.] Link Budget: 14.5 dB

CFETF1014-205

100BASE-TX (RJ-45)

[100 m/328 ft.]

to 100BASE-FX 1310nm SM (SC)

[20 km/12.4 mi.] Link Budget: 16.0 dB

CFETF1019-205

100BASE-TX (RJ-45)

[100 m/328 ft.]

to 100BASE-FX 1310nm SM (LC)

[20 km/12.4 mi.] Link Budget: 17.3 dB

CFETF1015-205

100BASE-TX (RJ-45)

[100 m/328 ft.]

to 100BASE-FX 1310nm SM (SC)

[40 km/24.9 mi.] Link Budget: 26.0 dB

CFETF1016-205

100BASE-TX (RJ-45)

[100 m/328 ft.]

to 100BASE-FX 1310nm SM (SC)

[60 km/37.3 mi.] Link Budget: 29.0 dB

CFETF1017-205

100BASE-TX (RJ-45)

[100 m/328 ft.]

to 100BASE-FX 1550nm SM (SC)

[80 km/49.7 mi.] Link Budget: 29.0 dB

Single Fiber Products
Recommended use in pairs

CFETF1029-205

100BASE-TX (RJ-45)

[100 m/328 ft.]

to 100BASE-FX1310nm TX / 1550nm RX

single fiber single mode (SC)

[20 km/12.4 mi.] Link Budget: 19.0 dB

CFETF1029-206

100BASE-TX (RJ-45)

[100 m/328 ft.]

to 100BASE-FX 1550nm TX / 1310nm RX

single fiber single mode (SC)

[20 km/12.4 mi.] Link Budget: 19.0 dB

CFETF1029-207

100BASE-TX (RJ-45)

[100 m/328 ft.]

to 100BASE-FX 1310nm TX / 1550nm RX

single fiber single mode (SC)

[40 km/24.9 mi.] Link Budget: 25.0 dB

CFETF1029-208

100BASE-TX (RJ-45)

[100 m/328 ft.]

to 100BASE-FX 1550nm TX / 1310nm RX

single fiber single mode (SC)

[40 km/24.9 mi.] Link Budget: 25.0 dB

CFETF1029-209

100BASE-TX (RJ-45)

[100 m/328 ft.]

to 100BASE-FX 1310nm TX / 1550nm RX

single fiber single mode (SC)

[60 km/37.3 mi.] Link Budget: 29.0 dB

CFETF1029-210

100BASE-TX (RJ-45) [100 m/328 ft.]

to 100BASE-FX 1550nm TX / 1310nm RX

single fiber single mode (SC)

[60 km/37.3 mi.] Link Budget: 28.0 dB

CFETF1029-211

100BASE-TX (RJ-45)

[100 m/328 ft.]

to 100BASE-FX 1310nm TX / 1550nm RX

single fiber single mode (SC)

[80 km/49.7 mi.] Link Budget: 33.0 dB

CFETF1029-212

100BASE-TX (RJ-45)

[100 m/328 ft.]

to 100BASE-FX 1550nm TX / 1310nm RX

single fiber single mode (SC)

[80 km/49.7 mi.] Link Budget: 32.0 dB

Ordering Info

[Class B]

See next page for complete fiber optic connector specs.