Справочник Пользователя для Pelco IMS0LW10-1V
TECHNICAL SPECIFICATIONS
GENERAL
Imaging Device
1/3-inch
Imager Type
CMOS
Imager Readout
Progressive scan
Maximum Resolution
800 x 600
Signal-to-Noise Ratio
50 dB
Auto Iris Lens Type
DC drive
Electronic Shutter Range
1 ~ 1/77,000 sec
Wide Dynamic Range
120 dB*
White Balance Range
2,000° to 10,000°K
Sensitivity
f/1.2; 2,850°K; SNR >20 dB
Color (1x/33 ms)
0.10 lux
Color SENS (15x/500 ms) 0.005 lux
Mono (1x/33 ms)
Mono (1x/33 ms)
0.05 lux
Mono SENS (15x/500 ms) 0.0013 lux
Dome Attenuation
Clear
Zero light loss
Smoked
f/1.0 light loss
Construction
Back-box
Alodine aluminum
Bubble
Polycarbonate plastic
Finish
Light gray powder coat
Weight
Unit
0.6 kg (1.4 lb)
Shipping
1.0 kg (2.2 lb)
Available Languages
Chinese, English, French, German, Italian,
Portuguese, Russian, Spanish, and Turkish
ELECTRICAL
Port
RJ-45 connector for 100Base-TX
Auto MDI/MDI-X
Auto MDI/MDI-X
Cable Type
Cat5 or better for 100Base-TX
Power Input
PoE (IEEE 802.3af class 2)
Power Consumption
†
3.9 W nominal
Service Port
External 3-connector, 2.5 mm provides
NTSC/PAL video output
NTSC/PAL video output
Accessory Port
Connects Pelco accessories
Audio
Streaming
Bidirectional: full or half duplex
Input/Output
Line level/external microphone input;
600-ohm differential, 1 Vp-p max signal level;
built-in microphone
600-ohm differential, 1 Vp-p max signal level;
built-in microphone
Compression
G.711 PCM 8 bit, 8 kHz mono at 64 kbit/s
MECHANICAL
Pan/Tilt Adjustment
Manual
Pan
355°
Tilt
180°
Rotate
220°
ENVIRONMENTAL
Operating Temperature
0° to 50°C (32° to 122°F)
Operating Humidity
20% to 80%, noncondensing
Impact Resistance
IK10++ per EN62262 (50J)
Shock and Vibration
Meets EN50155 Category 1, Class B;
IEC60068: 2-6 and 2-27
IEC60068: 2-6 and 2-27
*Sensor level; not inclusive of SureVision image processing.
†
Does not include optional accessories connected to the accessory port.
NOTE: VALUES IN PARENTHESES ARE INCHES; ALL OTHERS ARE CENTIMETERS.
IN-CEILING
Ø 8.61
(3.39)
10.06
(3.96)
4.52
(1.78)
10.52
(4.14)
13.08
(5.15)
SURFACE
(Mounting Ring is Available as an Accessory)
(Mounting Ring is Available as an Accessory)
Ø 8.61
(3.39)
13.71
(5.40)
11.43
(4.50)
Ø 2.69
(1.06)
PENDANT
(Mount is Available as an Accessory)
(Mount is Available as an Accessory)
Ø 8.61
(3.39)
13.46
(5.30)
1.32
(0.52)
(0.52)
15.11
(5.95)
THREADED STANDARD
1-1/2 N.P.T. EXTERNAL
1-1/2 N.P.T. EXTERNAL